Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

EZ Dupe, Inc.

EZ Dupe, Inc. Media Mirror Plus DVD Duplicator M1003-SSP 1 to 3 targets 128M buffer

SKU CH-H59H-AAVEN

Standalone duplicator copies flash media or optical discs to one to three target discs with 128 MB buffer

  • TypeMultimedia Duplicator
  • Target1 to 3
  • Buffer Memory128M
  • Operating TypeStandalone
  • Load TypeSlot
  • Power SupplyAC: 115-230 V, 50/60 Hz

Option Media Mirror Plus DVD

  • Standalone operation with no computer required
  • 128 MB buffer for stable high-speed copying
  • Copies one source disc to three target discs
  • Reads USB, SD, CF and Memory Stick media
  • Multi-session support combines several cards onto one disc

Standalone Multimedia Duplicator

The EZ Dupe Media Mirror Plus M1003-SSP is a standalone duplicator that copies between flash media and optical discs without a host computer. It supports one source to three target discs and includes 128M of buffer memory for stable operation. The unit handles CD-R, DVD-R and DVD+R formats alongside USB, SD, CF and Memory Stick media. It is built for users who need bi-directional media backup in a single desktop device.

Check Power and Media Compatibility

Verify that your mains supply delivers 115 to 230 V at 50 or 60 Hz to match the internal power supply. Ensure the source and target media you plan to use are listed among the supported card slots and disc formats. The duplicator copies up to three discs at once, so confirm you have enough blank media of the same format and size. No software installation or PC connection is required for any copy mode.

Sustained Copy Operation

The 128M buffer helps maintain consistent throughput during extended multi-disc sessions without data underruns. Standalone firmware manages the copy process directly, so performance does not depend on host USB bandwidth or CPU load. The slot-load drives and flash readers are rated for continuous cycling across the supported copy modes. Thermal design allows the unit to run back-to-back jobs without throttling.

Kohokohdat

  • Standalone operation with no computer required
  • 128 MB buffer for stable high-speed copying
  • Copies one source disc to three target discs
  • Reads USB, SD, CF and Memory Stick media
  • Multi-session support combines several cards onto one disc

Tekniset tiedot

BrandEZ Dupe
ModelMedia Mirror Plus DVD
Part NumberM1003-SSP
TypeMultimedia Duplicator
Target1 to 3
Buffer Memory128M
Operating TypeStandalone
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the M1003-SSP include blank discs or flash media, or must they be purchased separately?

The duplicator ships with the unit, power cable and card slots only. Blank CD-R, DVD-R, DVD+R discs and USB, CF, SD or Memory Stick media must be supplied by the user.

Should I choose the 1-to-3 target model for disc-to-disc runs or is a higher capacity version available?

This model copies one source disc to a maximum of three target discs per cycle. No larger target-count version is listed in the specifications.

What does the 128M buffer mean when I am copying a DVD to three blank discs at once?

The 128 MB buffer stores data read from the source disc and feeds all three writers simultaneously, preventing buffer underruns during multi-target burns.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.