Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black cubic G1/4" rotary fitting with knurled base, 24mm head, 360-degree rotation

FormulaMod

FormulaMod G1/4" 3-Way Rotary Fitting Black 360°

SKU CH-XF6V-5633S

A G1/4" three-way rotary fitting with 360° head rotation and 180° flow redirection for custom liquid-cooling loops

  • TypeFittings
  • ColorBlack

Color Black

  • 360° head rotation enables flexible tube routing
  • 180° water-direction change via T-3 threaded holes simplifies complex loops
  • Multi-way rotary seat supports unlimited angular adjustment for tight spaces
  • High-throughput brass structure maintains flow without restriction
  • Built-in sealing ring ensures leak-free G1/4" connections

Multi-Way Rotary Fitting

The FormulaMod G1/4" 3-Way Rotary Fitting in black is a brass water-cooling component designed to join three G1/4" ports in a cubic layout. Its head rotates a full 360 degrees for flexible tube routing, while the T-style threaded holes allow the water path to change direction up to 180 degrees. A built-in ring and high-throughput structure support unrestricted flow in custom loops.

Builders needing adjustable multi-port junctions

This fitting suits builders who need a compact three-way junction with full rotational freedom for complex tubing runs. It is not for loops that require only straight or rigid angled connections, nor for systems that need more than three connection points at a single junction. The knurled portion measures 9 mm for secure hand tightening.

Three G1/4" ports in a 24 mm cube

The single specification that decides fit is the 24 x 24 x 24 mm head size combined with three G1/4" internal threads. Verify that your block, radiator or reservoir ports match this thread standard and that the cubic footprint clears surrounding components in your loop layout.

Kohokohdat

  • 360° head rotation enables flexible tube routing
  • 180° water-direction change via T-3 threaded holes simplifies complex loops
  • Multi-way rotary seat supports unlimited angular adjustment for tight spaces
  • High-throughput brass structure maintains flow without restriction
  • Built-in sealing ring ensures leak-free G1/4" connections

Tekniset tiedot

TypeFittings
ColorBlack

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the FormulaMod G1/4" 3-Way Rotary Fitting and what step do people often miss?

Thread the G1/4" fitting into the component by hand, then tighten gently with a wrench on the 9 mm knurled section; the step often missed is leaving the head loose enough to rotate 360° after the body is sealed.

What maintenance or replacement will this fitting need later?

The built-in ring provides the seal; inspect it during loop draining and replace the O-ring if it shows cracking or flattening — no other parts require scheduled replacement.

What limit appears first when the fitting is under sustained use?

The 180° change of flow direction inside the T-3 threaded holes creates the primary restriction; the 24 mm cubic head and high-throughput design keep pressure drop low until that bend becomes the bottleneck.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.