Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight black 90-degree rotary fittings with diamond-textured brass bodies and G1/4 male-female threads

FormulaMod

FormulaMod 90° Rotary Fitting G1/4 Male-Female Black 8 Pack

SKU CH-7DP0-VNZ76

Eight black H59 brass 90-degree rotary adapters with freely rotating male G1/4 threads and diamond knurling for secure liquid-cooling connections

  • TypeFittings
  • ColorBlack

Color Black

  • H59 brass construction resists corrosion in liquid loops
  • 90° male-to-female elbow routes tubing in tight bends
  • Freely rotating male thread prevents kinking during assembly
  • Diamond-knurled body gives secure grip for hand-tightening
  • Eight fittings per pack complete a full loop build

Rotary Fitting Kit for Custom Loops

This eight-pack of G1/4 male-to-female rotary elbows lets builders route tubing at right angles inside a custom liquid-cooling loop. Each fitting is machined from H59 brass with a black finish and a diamond-textured knurl for grip. The free-spinning male thread simplifies alignment without stressing tubing or other components.

Build Integration and Clearance Benefits

The 90 degree angle redirects flow in tight corners where straight fittings would kink tubing or collide with motherboard heatsinks. Because the male end rotates independently, the elbow can be clocked to any orientation after the female side is seated, freeing the builder from precise thread-depth planning. Eight units cover most dual-radiator loops with room for drain or fill ports.

Sustained Load Behaviour

Under continuous pump pressure the brass body and internal O-ring maintain a leak-free seal without the creep that can affect plastic adapters. The rotating joint stays smooth through thermal cycles, so the fitting does not bind or loosen when coolant temperature rises during extended gaming or compute sessions.

Kohokohdat

  • H59 brass construction resists corrosion in liquid loops
  • 90° male-to-female elbow routes tubing in tight bends
  • Freely rotating male thread prevents kinking during assembly
  • Diamond-knurled body gives secure grip for hand-tightening
  • Eight fittings per pack complete a full loop build

Tekniset tiedot

TypeFittings
ColorBlack

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the first thermal or pressure limit these brass fittings reach during continuous circulation?

The H59 brass construction handles standard liquid-cooling pressures and temperatures; no specific burst-pressure or max-temperature figure is published.

How much noise, vibration or extra pump load do the rotary joints introduce after hours of operation?

The freely rotating male thread eliminates hose torque but adds no moving parts that generate noise or measurable flow restriction.

Which thread standard must the existing blocks, radiators or pumps already use for these adapters to connect?

Every component in the loop needs a G1/4″ female port to accept the male end of these 90° rotary fittings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.