Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Eight black 90-degree rotary fittings with diamond-textured brass bodies and G1/4 male-female threads

FormulaMod

FormulaMod 90° Rotary Fitting G1/4 Male-Female Black 8 Pack

SKU CH-7DP0-VNZ76

Eight black H59 brass 90-degree rotary adapters with freely rotating male G1/4 threads and diamond knurling for secure liquid-cooling connections

  • TypeFittings
  • ColorBlack

Color Black

  • H59 brass construction resists corrosion in liquid loops
  • 90° male-to-female elbow routes tubing in tight bends
  • Freely rotating male thread prevents kinking during assembly
  • Diamond-knurled body gives secure grip for hand-tightening
  • Eight fittings per pack complete a full loop build

Rotary Fitting Kit for Custom Loops

This eight-pack of G1/4 male-to-female rotary elbows lets builders route tubing at right angles inside a custom liquid-cooling loop. Each fitting is machined from H59 brass with a black finish and a diamond-textured knurl for grip. The free-spinning male thread simplifies alignment without stressing tubing or other components.

Build Integration and Clearance Benefits

The 90 degree angle redirects flow in tight corners where straight fittings would kink tubing or collide with motherboard heatsinks. Because the male end rotates independently, the elbow can be clocked to any orientation after the female side is seated, freeing the builder from precise thread-depth planning. Eight units cover most dual-radiator loops with room for drain or fill ports.

Sustained Load Behaviour

Under continuous pump pressure the brass body and internal O-ring maintain a leak-free seal without the creep that can affect plastic adapters. The rotating joint stays smooth through thermal cycles, so the fitting does not bind or loosen when coolant temperature rises during extended gaming or compute sessions.

Puncte forte

  • H59 brass construction resists corrosion in liquid loops
  • 90° male-to-female elbow routes tubing in tight bends
  • Freely rotating male thread prevents kinking during assembly
  • Diamond-knurled body gives secure grip for hand-tightening
  • Eight fittings per pack complete a full loop build

Specificații

TypeFittings
ColorBlack

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What is the first thermal or pressure limit these brass fittings reach during continuous circulation?

The H59 brass construction handles standard liquid-cooling pressures and temperatures; no specific burst-pressure or max-temperature figure is published.

How much noise, vibration or extra pump load do the rotary joints introduce after hours of operation?

The freely rotating male thread eliminates hose torque but adds no moving parts that generate noise or measurable flow restriction.

Which thread standard must the existing blocks, radiators or pumps already use for these adapters to connect?

Every component in the loop needs a G1/4″ female port to accept the male end of these 90° rotary fittings.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.