نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Eight black 90-degree rotary fittings with diamond-textured brass bodies and G1/4 male-female threads

FormulaMod

FormulaMod 90° Rotary Fitting G1/4 Male-Female Black 8 Pack

SKU CH-7DP0-VNZ76

Eight black H59 brass 90-degree rotary adapters with freely rotating male G1/4 threads and diamond knurling for secure liquid-cooling connections

  • TypeFittings
  • ColorBlack

Color Black

  • H59 brass construction resists corrosion in liquid loops
  • 90° male-to-female elbow routes tubing in tight bends
  • Freely rotating male thread prevents kinking during assembly
  • Diamond-knurled body gives secure grip for hand-tightening
  • Eight fittings per pack complete a full loop build

Rotary Fitting Kit for Custom Loops

This eight-pack of G1/4 male-to-female rotary elbows lets builders route tubing at right angles inside a custom liquid-cooling loop. Each fitting is machined from H59 brass with a black finish and a diamond-textured knurl for grip. The free-spinning male thread simplifies alignment without stressing tubing or other components.

Build Integration and Clearance Benefits

The 90 degree angle redirects flow in tight corners where straight fittings would kink tubing or collide with motherboard heatsinks. Because the male end rotates independently, the elbow can be clocked to any orientation after the female side is seated, freeing the builder from precise thread-depth planning. Eight units cover most dual-radiator loops with room for drain or fill ports.

Sustained Load Behaviour

Under continuous pump pressure the brass body and internal O-ring maintain a leak-free seal without the creep that can affect plastic adapters. The rotating joint stays smooth through thermal cycles, so the fitting does not bind or loosen when coolant temperature rises during extended gaming or compute sessions.

أبرز المميزات

  • H59 brass construction resists corrosion in liquid loops
  • 90° male-to-female elbow routes tubing in tight bends
  • Freely rotating male thread prevents kinking during assembly
  • Diamond-knurled body gives secure grip for hand-tightening
  • Eight fittings per pack complete a full loop build

المواصفات

TypeFittings
ColorBlack

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What is the first thermal or pressure limit these brass fittings reach during continuous circulation?

The H59 brass construction handles standard liquid-cooling pressures and temperatures; no specific burst-pressure or max-temperature figure is published.

How much noise, vibration or extra pump load do the rotary joints introduce after hours of operation?

The freely rotating male thread eliminates hose torque but adds no moving parts that generate noise or measurable flow restriction.

Which thread standard must the existing blocks, radiators or pumps already use for these adapters to connect?

Every component in the loop needs a G1/4″ female port to accept the male end of these 90° rotary fittings.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.