نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
White cubic rotary fitting with three G1/4 ports and knurled base

FormulaMod

FormulaMod G1/4" 3-Way Rotary Fitting White 24mm 360°

SKU CH-9NY8-VFP4Q

G1/4" 3-way rotary fitting with 360° head rotation and 180° flow redirection, 24 mm cubic brass body

  • TypeFittings
  • ColorWhite

Color White

  • 360° head rotation enables flexible tube routing
  • T-shaped design redirects flow up to 180°
  • High-throughput brass body maintains strong coolant flow
  • Built-in sealing ring prevents leaks at connections
  • 24 mm cubic head fits tight component spacing

FormulaMod G1/4" 3-Way Rotary Fitting White 24mm

This white FormulaMod fitting is a G1/4" three-way rotary adaptor designed for custom liquid-cooling loops. Its cubic head measures 24 mm on each side and rotates 360 degrees for flexible tube routing. The brass body includes a built-in sealing ring and a 9 mm knurled section for grip. It suits builders who need to split or redirect flow in multiple directions at a single junction.

Ideal for multi-direction routing

It works well when a loop requires three ports in a tight space and the ability to orient each port freely. The 360-degree head rotation and 180-degree water-path change allow complex layouts without extra fittings. It is not suited for builds that only need straight or angled two-port connections, nor for junctions requiring more than three ports at one point. Buyers wanting a simple coupler or elbow should choose a different fitting type.

G1/4" thread with 24 mm cubic rotary head

The single specification that determines fit is the G1/4" internal thread combined with a 24 mm cubic head that rotates 360 degrees. This defines compatibility with standard hard-tube or soft-tube fittings and the space needed inside the case. Verify that your blocks, radiators and reservoirs accept G1/4" ports and that 24 mm clearance exists around each connection point.

أبرز المميزات

  • 360° head rotation enables flexible tube routing
  • T-shaped design redirects flow up to 180°
  • High-throughput brass body maintains strong coolant flow
  • Built-in sealing ring prevents leaks at connections
  • 24 mm cubic head fits tight component spacing

المواصفات

TypeFittings
ColorWhite

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does my loop need G1/4" threads to use this fitting?

Yes, every port on this fitting uses a G1/4" thread so your blocks, radiators and tubing adapters must all match that size.

Can I keep my existing rigid tubing runs when adding this 24 mm cubic fitting?

The 24 mm cube body and 9 mm knurled thread length fit standard G1/4" spacing, so current rigid tubes can stay if the new routing matches the three-port layout.

How do I verify the 360° rotary head moves freely after installation?

Gently turn the head by hand through a full 360° rotation; it should spin smoothly without binding, confirming the internal ring and high-throughput channel are seated correctly.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.