نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black cubic G1/4" rotary fitting with knurled base, 24mm head, 360-degree rotation

FormulaMod

FormulaMod G1/4" 3-Way Rotary Fitting Black 360°

SKU CH-XF6V-5633S

A G1/4" three-way rotary fitting with 360° head rotation and 180° flow redirection for custom liquid-cooling loops

  • TypeFittings
  • ColorBlack

Color Black

  • 360° head rotation enables flexible tube routing
  • 180° water-direction change via T-3 threaded holes simplifies complex loops
  • Multi-way rotary seat supports unlimited angular adjustment for tight spaces
  • High-throughput brass structure maintains flow without restriction
  • Built-in sealing ring ensures leak-free G1/4" connections

Multi-Way Rotary Fitting

The FormulaMod G1/4" 3-Way Rotary Fitting in black is a brass water-cooling component designed to join three G1/4" ports in a cubic layout. Its head rotates a full 360 degrees for flexible tube routing, while the T-style threaded holes allow the water path to change direction up to 180 degrees. A built-in ring and high-throughput structure support unrestricted flow in custom loops.

Builders needing adjustable multi-port junctions

This fitting suits builders who need a compact three-way junction with full rotational freedom for complex tubing runs. It is not for loops that require only straight or rigid angled connections, nor for systems that need more than three connection points at a single junction. The knurled portion measures 9 mm for secure hand tightening.

Three G1/4" ports in a 24 mm cube

The single specification that decides fit is the 24 x 24 x 24 mm head size combined with three G1/4" internal threads. Verify that your block, radiator or reservoir ports match this thread standard and that the cubic footprint clears surrounding components in your loop layout.

أبرز المميزات

  • 360° head rotation enables flexible tube routing
  • 180° water-direction change via T-3 threaded holes simplifies complex loops
  • Multi-way rotary seat supports unlimited angular adjustment for tight spaces
  • High-throughput brass structure maintains flow without restriction
  • Built-in sealing ring ensures leak-free G1/4" connections

المواصفات

TypeFittings
ColorBlack

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install the FormulaMod G1/4" 3-Way Rotary Fitting and what step do people often miss?

Thread the G1/4" fitting into the component by hand, then tighten gently with a wrench on the 9 mm knurled section; the step often missed is leaving the head loose enough to rotate 360° after the body is sealed.

What maintenance or replacement will this fitting need later?

The built-in ring provides the seal; inspect it during loop draining and replace the O-ring if it shows cracking or flattening — no other parts require scheduled replacement.

What limit appears first when the fitting is under sustained use?

The 180° change of flow direction inside the T-3 threaded holes creates the primary restriction; the 24 mm cubic head and high-throughput design keep pressure drop low until that bend becomes the bottleneck.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.