Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver cubic 3-way rotary fitting, 24mm head, G1/4 threads

FormulaMod

FormulaMod G1/4" 3-Way Rotary Fitting Silver 24mm

SKU CH-CR5V-52392

A G1/4" brass rotary fitting with a 24 mm cubic head that rotates 360° and redirects flow up to 180° for flexible loop routing

  • TypeFittings
  • Colorsliver
  • 360-degree head rotation enables flexible tube routing
  • 180-degree water path change simplifies complex loop layouts
  • Multi-direction rotary seat adapts to tight spaces
  • High-throughput brass body maintains strong flow rates
  • 24 mm cubic head fits standard G1/4" ports

Multi-Way Rotary Fitting

The FormulaMod G1/4" 3-Way Rotary Fitting is a brass water-cooling adaptor with a cubic 24x24x24 mm head. It provides three G1/4" threaded ports and a knurled 9 mm section for tool grip. The head rotates 360 degrees and each threaded hole allows up to 180 degrees of angular change, enabling complex routing in custom loops.

Builders Needing Multi-Axis Routing

This fitting suits builders who must split flow across three directions or navigate tight spaces where rigid tubing cannot bend. The unrestricted 360-degree head rotation and 180-degree port articulation solve alignment problems that standard couplings cannot. Buyers who only need a straight pass-through or a single-angle connection should choose a simpler fitting.

Three-Port Cubic Geometry

The defining specification is the cubic head with three G1/4" female threads arranged at mutual right angles. Combined with full 360-degree head rotation and 180-degree port swing, this geometry decides whether the part fits your loop topology. Verify your layout requires a three-way junction before purchasing.

Kohokohdat

  • 360-degree head rotation enables flexible tube routing
  • 180-degree water path change simplifies complex loop layouts
  • Multi-direction rotary seat adapts to tight spaces
  • High-throughput brass body maintains strong flow rates
  • 24 mm cubic head fits standard G1/4" ports

Tekniset tiedot

TypeFittings
Colorsliver

Kysymyksiä tästä tuotteesta

What thread size and head clearance does this rotary fitting require?

The fitting uses a G1/4" thread and its cubic head measures 24x24x24 mm, so allow at least that much space around the port for the 360-degree rotating head.

How do I install the extender without stripping the brass threads?

Hand-tighten the G1/4" thread until the built-in ring seats, then give a very light quarter-turn with a wrench; the knurled portion is only 9 mm long so excess torque strips the soft brass.

When should I replace the internal sealing ring?

Inspect the built-in ring whenever you break the loop for maintenance; replace it if the rubber looks flattened, cracked or no longer springs back, otherwise the 360-degree rotary joint may leak.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.