Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small rectangular black controller with buttons and ARGB connectors

Fractal Design

Fractal Design FD-A-ADJ2-001 ARGB Controller case accessory

SKU CH-4C3Q-ZNB9S MPN FD-A-ADJ2-001

Hardware ARGB controller manages 5V addressable RGB fans and strips with twelve colour modes, five brightness levels and nine pulse effects without software

  • TypeARGB Controller
  • FeaturesCompatibility: 5V Addressable RGB devices Brightness modes:
  • Package ContentsAdjust 2 RGB controller RGB Y-cable (2x male-to-female)
  • Hardware control without software — works straight out of the box
  • Twelve colour modes, five brightness levels and nine pulse effects
  • Compatible with all standard 5V ARGB fans and strips
  • Remembers every setting after the system powers off
  • Magnetic mounting and Y-cable adapter simplify installation

Manual ARGB Controller

The Fractal Design Adjust 2 is a hardware controller for standard 5V addressable RGB fans, strips and devices. It provides software-free control over colours, brightness and pulse or motion effects. Settings are retained after the system is powered off. The unit includes magnets for flexible placement inside a chassis.

Compatibility Check

Verify that your ARGB devices use a standard 5V addressable header and do not exceed the 2.6A maximum load. The controller connects to a single 5V ARGB header on the motherboard or a powered hub. Ensure the header can supply sufficient current for the combined chain of fans and strips you intend to attach.

Build and Connectors

The compact controller measures 1.77" x 0.67" x 0.31" and weighs 0.03 lb. A supplied Y-cable adapter splits one connection into two male-to-female leads for chaining multiple devices. Magnetic mounting lets you secure the unit to any steel surface without screws or adhesive, keeping cables tidy during daily use.

Kohokohdat

  • Hardware control without software — works straight out of the box
  • Twelve colour modes, five brightness levels and nine pulse effects
  • Compatible with all standard 5V ARGB fans and strips
  • Remembers every setting after the system powers off
  • Magnetic mounting and Y-cable adapter simplify installation

Tekniset tiedot

BrandFractal Design
ModelFD-A-ADJ2-001
TypeARGB Controller
FeaturesCompatibility: 5V Addressable RGB devices
Brightness modes: 5 levels
Maximum Load: 2.6A
Dimensions: 1.77" x 0.67" x 0.31"
Weight: 0.03 lb
Package ContentsAdjust 2 RGB controller
RGB Y-cable (2x male-to-female)
Lähetyspaino0.07 kg
Pakkauksen mitat142 × 121 × 25 mm

Kysymyksiä tästä tuotteesta

What comes in the box and do I need to buy any extra cables for multiple ARGB devices?

The package includes the Adjust 2 controller and a Y-cable with two male-to-female connectors, so you can chain several 5V ARGB fans or strips without purchasing additional adapters.

Which version of the Adjust controller should I choose for standard 5V addressable RGB hardware?

This FD-A-ADJ2-001 model is the Adjust 2 revision built for all standard 5V ARGB LED fans, strips and devices, offering hardware-only control with no software required.

What does the 2.6A maximum load mean for the number of ARGB fans I can connect?

The 2.6A limit sets the total current draw for every device attached to the controller; add the rated current of each fan or strip to stay within that ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.