Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small rectangular black controller with buttons and ARGB connectors

Fractal Design

Fractal Design FD-A-ADJ2-001 ARGB Controller case accessory

SKU CH-4C3Q-ZNB9S MPN FD-A-ADJ2-001

Hardware ARGB controller manages 5V addressable RGB fans and strips with twelve colour modes, five brightness levels and nine pulse effects without software

  • TypeARGB Controller
  • FeaturesCompatibility: 5V Addressable RGB devices Brightness modes:
  • Package ContentsAdjust 2 RGB controller RGB Y-cable (2x male-to-female)
  • Hardware control without software — works straight out of the box
  • Twelve colour modes, five brightness levels and nine pulse effects
  • Compatible with all standard 5V ARGB fans and strips
  • Remembers every setting after the system powers off
  • Magnetic mounting and Y-cable adapter simplify installation

Manual ARGB Controller

The Fractal Design Adjust 2 is a hardware controller for standard 5V addressable RGB fans, strips and devices. It provides software-free control over colours, brightness and pulse or motion effects. Settings are retained after the system is powered off. The unit includes magnets for flexible placement inside a chassis.

Compatibility Check

Verify that your ARGB devices use a standard 5V addressable header and do not exceed the 2.6A maximum load. The controller connects to a single 5V ARGB header on the motherboard or a powered hub. Ensure the header can supply sufficient current for the combined chain of fans and strips you intend to attach.

Build and Connectors

The compact controller measures 1.77" x 0.67" x 0.31" and weighs 0.03 lb. A supplied Y-cable adapter splits one connection into two male-to-female leads for chaining multiple devices. Magnetic mounting lets you secure the unit to any steel surface without screws or adhesive, keeping cables tidy during daily use.

Poudarki

  • Hardware control without software — works straight out of the box
  • Twelve colour modes, five brightness levels and nine pulse effects
  • Compatible with all standard 5V ARGB fans and strips
  • Remembers every setting after the system powers off
  • Magnetic mounting and Y-cable adapter simplify installation

Specifikacije

BrandFractal Design
ModelFD-A-ADJ2-001
TypeARGB Controller
FeaturesCompatibility: 5V Addressable RGB devices
Brightness modes: 5 levels
Maximum Load: 2.6A
Dimensions: 1.77" x 0.67" x 0.31"
Weight: 0.03 lb
Package ContentsAdjust 2 RGB controller
RGB Y-cable (2x male-to-female)
Teža pošiljke0.07 kg
Velikost pošiljke142 × 121 × 25 mm

Vprašanja o tem izdelku

What comes in the box and do I need to buy any extra cables for multiple ARGB devices?

The package includes the Adjust 2 controller and a Y-cable with two male-to-female connectors, so you can chain several 5V ARGB fans or strips without purchasing additional adapters.

Which version of the Adjust controller should I choose for standard 5V addressable RGB hardware?

This FD-A-ADJ2-001 model is the Adjust 2 revision built for all standard 5V ARGB LED fans, strips and devices, offering hardware-only control with no software required.

What does the 2.6A maximum load mean for the number of ARGB fans I can connect?

The 2.6A limit sets the total current draw for every device attached to the controller; add the rated current of each fan or strip to stay within that ceiling.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.