Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four red DDR4 memory modules with aluminum heatspreaders

G.SKILL

G.SKILL Ripjaws V F4-2666C19Q-32GVR 32GB DDR4 2666 CL19 desktop RAM

SKU CH-Q71H-4CWZH MPN F4-2666C19Q-32GVR

A 32GB quad-channel DDR4 kit at 2666MHz with CL19 timing and a 42mm red heatspreader for broad motherboard compatibility

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19-43
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB kit (4 × 8 GB) for high-capacity desktop builds
  • DDR4 2666 speed with PC4 21300 bandwidth for responsive performance
  • CL19 latency and 19-19-19-43 timings tuned for stability
  • 20 V operation reduces power draw and heat
  • 42 mm low-profile heatspreader fits under large CPU coolers

Ripjaws V 32 GB DDR4 kit

This Ripjaws V kit supplies 32 GB of DDR4 memory across four matched 8 GB modules running at 2666 MT/s with CL19 timings. The 1.20 V operating voltage and unbuffered design suit standard desktop platforms. An aluminium heatspreader in red keeps the modules cool while maintaining a low 42 mm profile for broad cooler clearance.

Suited to mainstream gaming and editing builds

Builders assembling a DDR4 system on supported AMD TRX40, X570 or B550 chipsets and Intel X99, X299, Z170 through Z690 DDR4 platforms will find this kit validated for compatibility. Buyers needing ECC error correction or registered modules for workstation stability should look elsewhere. Mixing this kit with other memory sets is not recommended because kits are tested as matched sets.

Steady throughput under sustained loads

The CL19 19-19-19-43 timings deliver consistent bandwidth during extended rendering, video editing or data processing sessions. The heatspreader dissipates heat effectively so performance does not throttle during long workloads. Four modules populate most consumer boards fully, leaving no spare slots for later capacity increases beyond 32 GB.

Kohokohdat

  • 32 GB kit (4 × 8 GB) for high-capacity desktop builds
  • DDR4 2666 speed with PC4 21300 bandwidth for responsive performance
  • CL19 latency and 19-19-19-43 timings tuned for stability
  • 20 V operation reduces power draw and heat
  • 42 mm low-profile heatspreader fits under large CPU coolers

Tekniset tiedot

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-2666C19Q-32GVR
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19-43
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ColorRed
Heat SpreaderYes
FeaturesPerformance DDR4 memory designed for gaming and PC enthusiasts
Sleek and stylish aluminum heatspreader design
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result lower speeds, system instability, or damage to the system or its components.
Recommend UseAMD TRX40 / X570 / B550
Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Lähetyspaino0.20 kg
Pakkauksen mitat215 × 135 × 23 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 42 mm module height fit under my large CPU cooler?

The Ripjaws V modules measure 42 mm tall, which is designed to clear most oversized heatsinks without interference.

Can I run this 32 GB kit at its rated 2666 MT/s on an Intel Z590 board?

Yes, the kit is validated for Intel Z590 and other listed chipsets at DDR4 2666 with CL19 1.20 V timings.

Do I need to enable XMP in BIOS to reach the advertised speed?

The modules default to standard JEDEC speeds; enabling the XMP profile in BIOS applies the 2666 MT/s CL19 19-19-19-43 1.20 V settings automatically.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.