我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four red DDR4 memory modules with aluminum heatspreaders

G.SKILL

G.SKILL Ripjaws V F4-2666C19Q-32GVR 32GB DDR4 2666 CL19 desktop RAM

SKU CH-Q71H-4CWZH MPN F4-2666C19Q-32GVR

A 32GB quad-channel DDR4 kit at 2666MHz with CL19 timing and a 42mm red heatspreader for broad motherboard compatibility

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19-43
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB kit (4 × 8 GB) for high-capacity desktop builds
  • DDR4 2666 speed with PC4 21300 bandwidth for responsive performance
  • CL19 latency and 19-19-19-43 timings tuned for stability
  • 20 V operation reduces power draw and heat
  • 42 mm low-profile heatspreader fits under large CPU coolers

Ripjaws V 32 GB DDR4 kit

This Ripjaws V kit supplies 32 GB of DDR4 memory across four matched 8 GB modules running at 2666 MT/s with CL19 timings. The 1.20 V operating voltage and unbuffered design suit standard desktop platforms. An aluminium heatspreader in red keeps the modules cool while maintaining a low 42 mm profile for broad cooler clearance.

Suited to mainstream gaming and editing builds

Builders assembling a DDR4 system on supported AMD TRX40, X570 or B550 chipsets and Intel X99, X299, Z170 through Z690 DDR4 platforms will find this kit validated for compatibility. Buyers needing ECC error correction or registered modules for workstation stability should look elsewhere. Mixing this kit with other memory sets is not recommended because kits are tested as matched sets.

Steady throughput under sustained loads

The CL19 19-19-19-43 timings deliver consistent bandwidth during extended rendering, video editing or data processing sessions. The heatspreader dissipates heat effectively so performance does not throttle during long workloads. Four modules populate most consumer boards fully, leaving no spare slots for later capacity increases beyond 32 GB.

商品特色

  • 32 GB kit (4 × 8 GB) for high-capacity desktop builds
  • DDR4 2666 speed with PC4 21300 bandwidth for responsive performance
  • CL19 latency and 19-19-19-43 timings tuned for stability
  • 20 V operation reduces power draw and heat
  • 42 mm low-profile heatspreader fits under large CPU coolers

商品規格

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-2666C19Q-32GVR
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19-43
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ColorRed
Heat SpreaderYes
FeaturesPerformance DDR4 memory designed for gaming and PC enthusiasts
Sleek and stylish aluminum heatspreader design
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result lower speeds, system instability, or damage to the system or its components.
Recommend UseAMD TRX40 / X570 / B550
Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
出貨重量0.20 kg
包裝尺寸215 × 135 × 23 mm

其他版本

同系列還有 1 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 42 mm module height fit under my large CPU cooler?

The Ripjaws V modules measure 42 mm tall, which is designed to clear most oversized heatsinks without interference.

Can I run this 32 GB kit at its rated 2666 MT/s on an Intel Z590 board?

Yes, the kit is validated for Intel Z590 and other listed chipsets at DDR4 2666 with CL19 1.20 V timings.

Do I need to enable XMP in BIOS to reach the advertised speed?

The modules default to standard JEDEC speeds; enabling the XMP profile in BIOS applies the 2666 MT/s CL19 19-19-19-43 1.20 V settings automatically.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。