Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

G.SKILL

G.SKILL Trident Z Royal 32GB (4 x 8GB) DDR4 3200 CL14 desktop RAM F4-3200C14Q-32GTRS

SKU CH-WGYQ-5Y8BA MPN F4-3200C14Q-32GTRS

32GB quad-channel kit at DDR4 3200 CL14 with crystalline RGB light bar and silver aluminium heatspreaders

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL14
  • Timing14-14-14-34
  • Voltage1.35V
  • ECCNo

Capacity 32GB (4 x 8GB)

CAS Latency CL14

Color Silver

  • Crystalline light bar refracts 8 RGB zones for vivid illumination
  • Mirrored silver aluminum heatspreaders cool modules with classic tri-fin design
  • CL14 14-14-14-34 timing delivers responsive DDR4 3200 performance
  • 35V operation enables efficient high-speed stability
  • 32GB quad-channel kit (4 x 8GB) maximises desktop capacity

Crown jewel RGB memory kit

This G.SKILL Trident Z Royal kit delivers 32GB of DDR4 3200 memory in a matched 4 x 8GB configuration. Each module runs at CL14 with 14-14-14-34 timings and 1.35V. The silver aluminium heatspreaders use a CNC-cut tri-fin design while a crystalline light bar splits light across eight addressable RGB zones per stick.

Builders who value low latency lighting control

The tight CL14 timings suit enthusiasts tuning for maximum DDR4 responsiveness on platforms that support XMP profiles at this speed. Systems limited to JEDEC speeds or boards that cannot train 3200 MT/s at CL14 will not reach the rated performance. Buyers who need ECC error correction or registered modules must choose a different product class.

14-14-14-34 CL14 timing at DDR4 3200

The 14-14-14-34 timing set at 3200 MT/s is the specification that determines whether this kit matches the memory controller capabilities of the target platform. Verify that the motherboard QVL lists this exact timing and voltage combination before purchase.

Kohokohdat

  • Crystalline light bar refracts 8 RGB zones for vivid illumination
  • Mirrored silver aluminum heatspreaders cool modules with classic tri-fin design
  • CL14 14-14-14-34 timing delivers responsive DDR4 3200 performance
  • 35V operation enables efficient high-speed stability
  • 32GB quad-channel kit (4 x 8GB) maximises desktop capacity

Tekniset tiedot

BrandG.SKILL
SeriesTrident Z Royal Series
ModelF4-3200C14Q-32GTRS
Capacity32GB (4 x 8GB)
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL14
Timing14-14-14-34
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ColorSilver
Heat SpreaderYes
FeaturesUnique crystalline light bar design.
Mirrored-finish aluminum heatspreaders in gold or silver.
Fluid rainbow wave default lighting effect.
Hand-screened IC & custom 10-layer PCB for improved overclock performance.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP
Recommend UseAMD X399 / TRX40 / X570 / X470 / B550
Intel X299 / Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270
LED ColorRGB
Lähetyspaino0.45 kg
Pakkauksen mitat246 × 178 × 3 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the DDR4 3200 interface cap real-world throughput at PC4 25600?

Yes, the kit runs at DDR4 3200 which is rated PC4 25600, so peak bandwidth is limited to that figure in practice.

What clearance do the 288-pin modules with the crystalline light bar and mirrored heatspreaders need?

Each stick uses a standard 288-pin DIMM with a tall CNC-cut aluminum heatspreader and an 8-zone RGB light bar, so allow extra height for CPU cooler clearance.

How do I enable the CL14 14-14-14-34 timings at 1.35 V, and what step is often missed?

Enable the XMP profile in the motherboard BIOS to load the rated 3200 MT/s, CL14 timings and 1.35 V; the common mistake is leaving the board on auto defaults.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.