NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
Micro-ATX board for 10th Gen Intel LGA 1200 CPUs with dual-channel DDR4 up to 64 GB, PCIe Gen3 x4 M.2, 8118 Gaming LAN and Smart Fan 5
The board uses the Intel B460 chipset and an LGA 1200 socket for 10th Generation Intel Core i9, i7, i5, i3, Pentium and Celeron processors. Two DDR4 DIMM slots provide dual-channel memory up to 64 GB total with a 32 GB per-module limit. Supported speeds reach 2933 MHz with i9 or i7 CPUs and 2666 MHz with i5, i3, Pentium or Celeron CPUs, plus XMP profile support.
A single M.2 slot accepts PCIe Gen3 x4 or SATA drives for fast boot and storage expansion. The integrated 8118 Gaming LAN controller adds bandwidth-management software and 15 KV surge protection for wired network reliability. Anti-sulfur resistors on the PCB improve long-term durability in humid environments.
Onboard graphics from compatible CPUs drive one D-Sub port at 1920 x 1200 @ 60 Hz and one HDMI 1.4 port at 4096 x 2160 @ 30 Hz with HDCP 2.3, sharing up to 512 MB of system memory. Smart Fan 5 uses multiple temperature sensors and hybrid headers with Fan Stop to keep temperatures low and noise down during everyday use.
| Brand | GIGABYTE |
|---|---|
| Series | B460M GAMING HD |
| CPU Socket Type | LGA 1200 |
| CPU Type | Celeron Dual-Core |
| Chipset | Intel |
| Form Factor | Micro ATX |
Yes, 10th Gen Core i5 processors are supported and the board runs DDR4 at 2666 MHz with those CPUs, so your current modules will work at their rated speed.
Install the LAN driver from the support page, then check Device Manager — the adapter will appear as the 8118 Gaming LAN and the status LEDs on the rear port will light when a cable is connected.
The motherboard ships with the M.2 mounting screw and standoff pre-installed, so no extra hardware is required to fit a PCIe Gen3 x4 or SATA M.2 drive.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?