BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
LGA 1155 ATX board with Intel H61 chipset, two DDR3 slots for up to 16GB, one PCIe 3.0 x16 slot, two PCIe x1 slots, four SATA ports, Realtek ALC887 audio and RTL8111F gigabit LAN
This motherboard uses the Intel H61 chipset and fits the LGA 1155 socket. It provides two DDR3 DIMM slots for up to 16GB of system memory. The board follows the standard ATX layout measuring 30.5 by 19 centimetres.
The board targets users replacing a failed H61 motherboard or assembling a system around an existing LGA 1155 processor. It lacks modern interfaces such as USB 3.0 or SATA 6Gb/s, so builders starting a new platform should select a current chipset.
A single PCI Express x16 slot operates at the 3.0 specification when the installed processor and graphics card both support it. This slot determines which graphics cards can run at their rated bandwidth.
| Brand | GIGABYTE |
|---|---|
| Series | GIGABYTE GA-P61-S3(rev.2.0) |
| Model | GIGABYTE GA-P61-S3(rev.2.0) |
| CPU Socket Type | LGA 1155 |
| CPU Type | 1. Support LGA1155 Slot Processor: Intel Core ™ i7 Processor/Intel Core ™ i5 Processor/Intel Core ™ i3 Processor/Intel Pentium Processor/Intel Celeron Processor 2. L3 cache depends on CPU |
| Chipset | Intel H61 |
| Maximum Memory Supported | 16GB |
| PCI Slots | 1 PCI Express x16 slot, supporting x16 operating specifications (PCI Express x16 slot supports PCI Express 3.0) PCIe Gen.3 depends on CPU support and graphics card compatibility. 2 PCI Express x1 slots All PCI Express x1 slots support PCI Express 2.0. 3. 3 PCI slots |
| SATA RAID | 4XSATA II interface |
| Audio Chipset | 1. Built-in Realtek ALC887 sound chip 2. Support High Definition Audio 3. Support 2/4/5 1/7.1 channels To activate the 7.1 channel audio output, you must use the front panel audio output of the HD (High Definition, High Fax) audio module and select the multi-channel audio function through the audio software. 4. Support S/PDIF output |
| LAN Chipset | Built-in 1 Realtek RTL8111F LAN chip (10/100/1000 Mbit) |
| Onboard USB | Built-in chipset: Up to 8 USB 2.0/1 ports (4 on the rear panel, 4 to be connected from the USB socket in the main board via cable) |
The x16 slot is wired for PCI Express 3.0, but actual Gen 3 operation depends on the installed CPU and graphics card; if either lacks Gen 3 support the link falls back to a lower generation.
The board measures 30.5 by 19 cm and follows the standard ATX mounting pattern, so it fits any case that accepts ATX motherboards.
Connect the case front-panel audio cable to the onboard HD audio header; 7.1 channel output only activates when speakers are plugged into that front panel, not the rear jacks.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?