Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
GIGABYTE
LGA 1155 ATX board with Intel H61 chipset, two DDR3 slots for up to 16GB, one PCIe 3.0 x16 slot, two PCIe x1 slots, four SATA ports, Realtek ALC887 audio and RTL8111F gigabit LAN
This motherboard uses the Intel H61 chipset and fits the LGA 1155 socket. It provides two DDR3 DIMM slots for up to 16GB of system memory. The board follows the standard ATX layout measuring 30.5 by 19 centimetres.
The board targets users replacing a failed H61 motherboard or assembling a system around an existing LGA 1155 processor. It lacks modern interfaces such as USB 3.0 or SATA 6Gb/s, so builders starting a new platform should select a current chipset.
A single PCI Express x16 slot operates at the 3.0 specification when the installed processor and graphics card both support it. This slot determines which graphics cards can run at their rated bandwidth.
| Brand | GIGABYTE |
|---|---|
| Series | GIGABYTE GA-P61-S3(rev.2.0) |
| Model | GIGABYTE GA-P61-S3(rev.2.0) |
| CPU Socket Type | LGA 1155 |
| CPU Type | 1. Support LGA1155 Slot Processor: Intel Core ™ i7 Processor/Intel Core ™ i5 Processor/Intel Core ™ i3 Processor/Intel Pentium Processor/Intel Celeron Processor 2. L3 cache depends on CPU |
| Chipset | Intel H61 |
| Maximum Memory Supported | 16GB |
| PCI Slots | 1 PCI Express x16 slot, supporting x16 operating specifications (PCI Express x16 slot supports PCI Express 3.0) PCIe Gen.3 depends on CPU support and graphics card compatibility. 2 PCI Express x1 slots All PCI Express x1 slots support PCI Express 2.0. 3. 3 PCI slots |
| SATA RAID | 4XSATA II interface |
| Audio Chipset | 1. Built-in Realtek ALC887 sound chip 2. Support High Definition Audio 3. Support 2/4/5 1/7.1 channels To activate the 7.1 channel audio output, you must use the front panel audio output of the HD (High Definition, High Fax) audio module and select the multi-channel audio function through the audio software. 4. Support S/PDIF output |
| LAN Chipset | Built-in 1 Realtek RTL8111F LAN chip (10/100/1000 Mbit) |
| Onboard USB | Built-in chipset: Up to 8 USB 2.0/1 ports (4 on the rear panel, 4 to be connected from the USB socket in the main board via cable) |
The x16 slot is wired for PCI Express 3.0, but actual Gen 3 operation depends on the installed CPU and graphics card; if either lacks Gen 3 support the link falls back to a lower generation.
The board measures 30.5 by 19 cm and follows the standard ATX mounting pattern, so it fits any case that accepts ATX motherboards.
Connect the case front-panel audio cable to the onboard HD audio header; 7.1 channel output only activates when speakers are plugged into that front panel, not the rear jacks.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?