Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green ATX motherboard with silver heatsinks and black slots, no rear I/O shield

GIGABYTE

GIGABYTE GA-Z68P-DS3 rev.1.0 Z68 Socket LGA1155 DDR3 ATX Motherboard

SKU CH-4M44-SYVRH

Z68 ATX board for LGA1155 CPUs and DDR3 memory, sold without I/O shield or accessories

  • Z68 chipset enables SSD caching for faster system responsiveness
  • LGA1155 socket supports second and third generation Intel Core processors
  • DDR3 memory architecture provides reliable performance for everyday computing
  • ATX form factor fits standard cases with full expansion capability
  • Grade A condition ensures fully functional motherboard pulled from new PC

Z68 ATX board for LGA1155 builds

This GIGABYTE GA-Z68P-DS3 revision 1.0 is an Intel Z68 chipset motherboard in ATX form factor. It accepts Socket LGA1155 processors and DDR3 memory. The unit is sold as the bare board only, with no I/O shield, cables or manuals included.

Straightforward ATX installation, missing backplate

Mounting follows standard ATX screw positions in any compatible chassis. The absent I/O shield means you must reuse an existing one or source a replacement separately. Inspect the CPU socket and DDR3 slots for bent pins or debris before fitting components, as the board was removed from a new system.

Verify LGA1155 CPU and DDR3 modules on hand

Confirm you have a Socket LGA1155 processor and DDR3 DIMMs before ordering, because the board supports only that combination. Check that your case accepts a full-size ATX board and that your power supply provides the required ATX and CPU power connectors. No accessories are bundled, so plan for an I/O shield and any necessary cables.

Kohokohdat

  • Z68 chipset enables SSD caching for faster system responsiveness
  • LGA1155 socket supports second and third generation Intel Core processors
  • DDR3 memory architecture provides reliable performance for everyday computing
  • ATX form factor fits standard cases with full expansion capability
  • Grade A condition ensures fully functional motherboard pulled from new PC

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I confirm the board is fully operational after installation?

Power on the system and verify the POST screen appears with the Z68 chipset and LGA1155 socket detected. Check that all DDR3 slots report the installed memory capacity in BIOS.

What ships with the motherboard and what must I source separately?

Only the GA-Z68P-DS3 rev.1.0 board itself is included. No I/O shield, cables, manuals or other accessories are provided, so you will need to obtain those separately.

Which revision of this Z68 board should I select for my build?

The listed revision is 1.0. Match this exact revision number to your original part number to ensure compatibility, as other revisions may not be interchangeable.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.