BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
GIGABYTE
Z68 ATX board for LGA1155 CPUs and DDR3 memory, sold without I/O shield or accessories
This GIGABYTE GA-Z68P-DS3 revision 1.0 is an Intel Z68 chipset motherboard in ATX form factor. It accepts Socket LGA1155 processors and DDR3 memory. The unit is sold as the bare board only, with no I/O shield, cables or manuals included.
Mounting follows standard ATX screw positions in any compatible chassis. The absent I/O shield means you must reuse an existing one or source a replacement separately. Inspect the CPU socket and DDR3 slots for bent pins or debris before fitting components, as the board was removed from a new system.
Confirm you have a Socket LGA1155 processor and DDR3 DIMMs before ordering, because the board supports only that combination. Check that your case accepts a full-size ATX board and that your power supply provides the required ATX and CPU power connectors. No accessories are bundled, so plan for an I/O shield and any necessary cables.
この商品の仕様はまだ公開されていません。
Power on the system and verify the POST screen appears with the Z68 chipset and LGA1155 socket detected. Check that all DDR3 slots report the installed memory capacity in BIOS.
Only the GA-Z68P-DS3 rev.1.0 board itself is included. No I/O shield, cables, manuals or other accessories are provided, so you will need to obtain those separately.
The listed revision is 1.0. Match this exact revision number to your original part number to ensure compatibility, as other revisions may not be interchangeable.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?