Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact silver aluminium Mini-ITX chassis, 5.8L volume, single front USB 3.0 port

Gintol

Gintol A1P Mini-ITX PC Case 5.8L Silver

SKU CH-7TYY-NRRKJ

A 5.8 L all-aluminium Mini-ITX chassis weighing 1 kg, taking a 195×146×44 mm GPU via riser, 48 mm CPU cooler, FLEX PSU, two 2.5″ SSDs or one 3.5″ drive, one 9015 fan and a front USB 3.0 port

  • ColorSilver
  • With Power SupplyNo
  • Power SupplySupports FLEX (mini 1U)
  • Motherboard Compatibilitymini-ITX
  • With front LCD displayNo
  • Expansion SlotsSupports 2.5 SSD hard drives *2 Supports one 3.5 or 2.5-inch
  • Compact 5.8L footprint saves desk space
  • All-aluminium shell keeps weight at 1KG
  • Fits graphics cards up to 195mm with dual reflex cable
  • Low-profile CPU coolers up to 48mm supported
  • USB 3.0 front port for fast peripheral access

Compact 5.8 Litre Aluminium Chassis

The Gintol A1P is an all-aluminium Mini-ITX enclosure with a 5.8 litre internal volume and a weight of 1 kg. It accepts a single 9015 fan for airflow and provides one front USB 3.0 port for external connectivity. The case shell is sold alone without any included fans or accessories.

Home-Office Builders Seeking Portability

This chassis suits users building a compact home-office or HTPC system who value a lightweight aluminium frame and minimal desk footprint. Builders who require room for multiple 3.5 inch drives, additional expansion cards, or tall CPU coolers exceeding 48 mm should consider a larger enclosure.

GPU Clearance Dictates Graphics Choice

The maximum supported graphics card dimensions are 195 mm by 146 mm by 44 mm and installation requires a dual reflex riser cable with 185 mm recommended length. If your card exceeds any of these measurements it will not fit inside this chassis.

Kohokohdat

  • Compact 5.8L footprint saves desk space
  • All-aluminium shell keeps weight at 1KG
  • Fits graphics cards up to 195mm with dual reflex cable
  • Low-profile CPU coolers up to 48mm supported
  • USB 3.0 front port for fast peripheral access

Tekniset tiedot

ModelA1P
ColorSilver
With Power SupplyNo
Power SupplySupports FLEX (mini 1U)
Motherboard Compatibilitymini-ITX
With front LCD displayNo
Expansion SlotsSupports 2.5 SSD hard drives *2
Supports one 3.5 or 2.5-inch harddrive without a graphics card
Front PortsUSB3.0*1
Fan OptionsSupports 9015 fans, supports 1 fan
Max GPU LengthSupports 195mm*146mm*44mm
Max CPU Cooler HeightSupport height within 48mm
Max PSU LengthFLEX/1U
Weight1KG

Kysymyksiä tästä tuotteesta

What clearance does the case give for a CPU cooler?

The chassis allows a cooler up to 48 mm tall, so choose a low-profile model that stays within that limit.

How do I mount a graphics card and what mistake should I avoid?

Insert the card into the PCIe slot, then connect a dual reflex riser cable; the spec calls for a 185 mm cable, so do not try a shorter or longer one.

Which drive bays will I need to replace or add later?

Two 2.5-inch SSD mounts are built in, and a single 3.5-inch or 2.5-inch bay is available when no graphics card is installed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.