Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular M.2 2280 SSD with black graphene heatsink and gold edge connector

GUDGA

GUDGA GVY 512GB M.2 2280 PCIe 3.0 x4 NVMe internal SSD with heatsink

SKU CH-VF4D-XHBPT

A 512GB M.2 2280 PCIe 3.0 x4 NVMe 1.3 internal SSD with 3D TLC NAND, graphene heatsink and sequential speeds up to 3300MB/s read and 2700MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Memory Components3D TLC
  • InterfacePCI-Express 3.0 x4
  • ProtocolNVMe 1.3

Options 512GB

  • Sequential reads up to 3300 MB/s with PCIe 3.0 x4 NVMe 1.3
  • Sequential writes up to 2700 MB/s using 3D TLC NAND flash
  • Graphene heat-dissipation patch keeps temperatures low under load
  • M.2 2280 form factor fits laptops and desktops
  • 512 GB capacity stores OS, games and applications

GVY 512 GB NVMe drive with heatsink

The GUDGA GVY is a 512 GB M.2 2280 internal solid-state drive that uses a PCIe 3.0 x4 interface and the NVMe 1.3 protocol. It is built with 3D TLC NAND flash and includes a graphene heat-dissipation patch. The drive suits desktop PCs, laptops and gaming systems that need faster start-up and file transfers.

Thermals and power in daily use

The integrated graphene patch spreads heat across the controller and NAND packages without adding moving parts. Because the drive relies on passive conduction, it produces no fan noise and draws only the power required by the PCIe 3.0 x4 link during typical workloads. Temperatures stay controlled during sustained reads and writes.

Sequential speed that defines the fit

Maximum sequential read reaches 3300 MB/s and maximum sequential write reaches 2700 MB/s. These figures determine whether the drive matches the throughput needs of a given platform or application. If the system can use PCIe 3.0 x4 bandwidth, the GVY delivers the rated speeds.

Kohokohdat

  • Sequential reads up to 3300 MB/s with PCIe 3.0 x4 NVMe 1.3
  • Sequential writes up to 2700 MB/s using 3D TLC NAND flash
  • Graphene heat-dissipation patch keeps temperatures low under load
  • M.2 2280 form factor fits laptops and desktops
  • 512 GB capacity stores OS, games and applications

Tekniset tiedot

BrandGUDGA
SeriesGVY
ModelGVY-XXX-2280
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Memory Components3D TLC
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
HeatSinkwith HeatSink
Manufacturer RecertifiedYes

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this drive fit in a standard M.2 2280 slot with the heatsink installed?

The drive follows the M.2 2280 form factor and includes a graphene heat dissipation patch; verify your motherboard or laptop clearance for the added thickness before installing.

What maximum sequential speeds can I expect from this PCIe 3.0 x4 NVMe SSD?

The manufacturer rates the drive at up to 3300 MB/s read and up to 2700 MB/s write over the PCIe 3.0 x4 interface using the NVMe 1.3 protocol.

Does the 3D TLC NAND and heatsink help sustain performance during heavy workloads?

The 3D TLC flash combined with the graphene thermal patch is designed to manage heat during extended transfers, helping maintain consistent speeds for gaming and large file moves.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.