Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Hetai Tech

Hetai Tech 2.5" SATA to USB 3.0 Drive Enclosure

SKU CH-CW2A-3GNV8

A 2.5 inch SATA enclosure connects a hard drive or SSD to a USB 3.0 port

  • TypeEnclosure
  • Connect any 2.5 inch SATA drive via USB 3.0
  • Plug-and-play enclosure needs no extra drivers
  • Lightweight case protects SSD or HDD during transport
  • Tool-free design lets you swap drives in seconds

2.5" SATA USB 3.0 Enclosure

This Hetai Tech enclosure converts a 2.5 inch SATA hard drive or SSD into an external USB 3.0 storage device. The case accepts standard 2.5 inch drives and connects to a host computer through a USB 3.0 interface. It provides a simple way to access data from an internal drive without installing it inside a chassis. The unit is supplied new and ready for immediate use.

Suits users adding portable storage

Builders who want to reuse a spare 2.5 inch SATA drive for backups or file transfers will find this enclosure convenient. It is not intended for 3.5 inch drives or for drives that require a different physical interface. Users needing higher throughput than USB 3.0 provides should consider alternative connection methods. The product includes the enclosure only; a drive must be sourced separately.

Kohokohdat

  • Connect any 2.5 inch SATA drive via USB 3.0
  • Plug-and-play enclosure needs no extra drivers
  • Lightweight case protects SSD or HDD during transport
  • Tool-free design lets you swap drives in seconds

Tekniset tiedot

TypeEnclosure

Kysymyksiä tästä tuotteesta

What transfer speed does the USB 3.0 interface cap at in practice?

The USB 3.0 connection limits real-world throughput to the SATA drive's maximum, typically around 5 Gbps before overhead.

Does the 2.5 inch enclosure need any special mounting hardware to fit a standard drive?

It accepts a bare 2.5 inch SATA SSD or hard drive directly; no extra brackets or screws are required beyond what the drive provides.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.