Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare hard drive with exposed circuit board

HGST

HGST MegaScale DC 4000.B HMS5C4040BLE641 4TB 64MB SATA 6.0Gb/s 3.5" Enterprise CoolSpin internal hard drive

SKU CH-66CA-4R8CG

Enterprise 3.5" SATA hard drive delivering 4TB capacity, 64MB cache and 800K-hour MTBF for 24×7 cloud storage arrays

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • Cache64MB
  • Features24x7 accessibility for enterprise-class, capacity-optimized
  • Form Factor3.5"
  • Enterprise reliability with 800K hours MTBF
  • Continuous 24x7 operation for cloud workloads
  • 4TB capacity in standard 3.5" form factor
  • 0Gb/s SATA interface with 64MB cache
  • Advanced 512e format with dual-stage actuator

4 TB SATA enterprise drive

The HGST MegaScale DC 4000.B HMS5C4040BLE641 is a 3.5 inch internal hard drive with a 4 TB capacity and a SATA 6.0 Gb/s interface. It is built for 24x7 operation in enterprise-class, capacity-optimised applications. The bare drive includes 64 MB cache and Advanced Format 512e technology.

Suited for bulk storage arrays

This drive fits low-workload cloud storage, massive scale-out deployments, data warehousing and disk-to-disk backup. Buyers needing higher sustained throughput for transactional databases should look elsewhere. Systems limited to legacy SATA revisions will not reach the rated interface speed.

800 K hours MTBF rating

The 800 K hours MTBF figure is the key reliability metric for multi-drive environments. Dual Stage Actuator and Enhanced Rotational Vibration Safeguard support consistent performance in dense chassis. Verify that your enclosure accepts the 26.1 mm height before purchase.

Kohokohdat

  • Enterprise reliability with 800K hours MTBF
  • Continuous 24x7 operation for cloud workloads
  • 4TB capacity in standard 3.5" form factor
  • 0Gb/s SATA interface with 64MB cache
  • Advanced 512e format with dual-stage actuator

Tekniset tiedot

BrandHGST
SeriesMegaScale DC 4000.B
ModelHMS5C4040BLE641 (0F22149)
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
Cache64MB
Features24x7 accessibility for enterprise-class, capacity-optimized applications
800K hours MTBF
4 terabytes of capacity
Advanced Format with 512-byte emulation (512e)
6Gb/s SATA interface
Dual Stage Actuator (DSA) and Enhanced Rotational Vibration Safeguard (RVS) for robust performance in multi-drive environments
Applications/Environments
- Low application workload cloud storage
- Massive Scale Out (MSO)
- Data warehousing & mining
- Disk-to-disk backup & archiving
Form Factor3.5"
Height (maximum)26.1mm
Width (maximum)101.6(+/-0.25)mm
Length (maximum)147mm

Kysymyksiä tästä tuotteesta

Will the 3.5" form factor and SATA 6.0Gb/s interface let this drive drop into my older desktop chassis and motherboard?

Yes, the 3.5" form factor and SATA 6.0Gb/s interface match standard desktop bays and controllers, so the drive installs directly into existing hardware.

How can I verify the Advanced Format 512e and 64MB cache are active after installation?

Check the drive properties in your operating system or BIOS; they will report 512-byte emulation and a 64MB cache when the drive is recognised.

Since the packaging is listed as Bare Drive, what must I supply myself?

You will need to provide your own SATA data cable, SATA power cable, and 3.5" mounting screws or tray, as the bare drive includes none of these.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.