Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare SATA hard drive with exposed circuit board

HP

HP 454146-S21 1TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-8PM8-YM40A MPN 454146-S21

A 1 TB 3.5 inch desktop hard drive spinning at 7200 RPM with a SATA 3.0 Gb/s interface and a 300 MBps maximum external data transfer rate

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • FeaturesMaximum External Data Transfer Rate: 300 MBps (2.3 Gbps) SAT
  • UsageIdeal for Servers
  • 1TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 3.0Gb/s interface integrates with existing server controllers
  • 300 MBps maximum external transfer rate supports steady throughput
  • 5-inch form factor fits standard server drive bays

Capacity and interface

This HP 454146-S21 is a 1TB 3.5" internal hard drive with a SATA 3.0Gb/s interface. It spins at 7200 RPM and is supplied as a bare drive. The drive targets server and storage environments that need large-capacity magnetic storage.

Server workloads versus desktop or portable needs

The drive suits entry-level servers and non-mission-critical workloads where cost per gigabyte matters. It is not for systems that require solid-state speed, silent operation or a 2.5" form factor. Buyers needing higher throughput or hot-plug trays should look at other drive classes.

SATA 3.0Gb/s interface

The single specification that decides fit is the SATA 3.0Gb/s interface with a maximum external transfer rate of 300 MBps. The host must provide a matching SATA port and 3.5" bay; drives with newer or faster interfaces will not work in this slot.

Kohokohdat

  • 1TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 3.0Gb/s interface integrates with existing server controllers
  • 300 MBps maximum external transfer rate supports steady throughput
  • 5-inch form factor fits standard server drive bays

Tekniset tiedot

BrandHP
Model454146-S21
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity1TB
RPM7200 RPM
FeaturesMaximum External Data Transfer Rate: 300 MBps (2.3 Gbps)
SATA Pin: 7-pin
UsageIdeal for Servers
Form Factor3.5"
Lähetyspaino1.45 kg
Pakkauksen mitat292 × 229 × 137 mm

Kysymyksiä tästä tuotteesta

What does the 7200 RPM spindle speed mean for everyday server workloads?

The 7200 RPM rotation gives faster random access than slower drives, which helps with typical server tasks such as file serving or database logging.

How does the SATA 3.0Gb/s interface limit real-world throughput?

The SATA 3.0Gb/s link caps the maximum external transfer rate at 300 MBps, so sustained reads and writes cannot exceed that ceiling.

Will this 3.5 inch bare drive fit a standard server drive bay?

Yes, the 3.5 inch form factor matches the common large form factor bays used in many rack and tower servers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.