Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular 2.5 inch enterprise hard drive with label showing model 697574-B21 and capacity 1.2TB

HP

HP 697574-B21 1.2TB 10000 RPM SAS 6Gb/s 2.5" laptop hard drive

SKU CH-VTEK-SW66X MPN 697574-B21

Enterprise 2.5" SAS hard drive with 1.2TB capacity and 10000 RPM speed for demanding storage workloads

  • InterfaceSAS 6Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • UsageFor Enterprise Storage
  • Form Factor2.5"
  • Height (maximum)15mm
  • 2 TB capacity stores large enterprise datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 6Gb/s interface provides reliable connectivity
  • 5 inch 15 mm form factor fits dense servers
  • Built for enterprise storage workloads

Enterprise SAS drive

The HP 697574-B21 is a 1.2TB 10000 RPM SAS 6Gb/s hard drive built for enterprise storage workloads. Its 2.5 inch small form factor fits dense server and storage arrays that demand high IOPS. The drive is new and ships in original or OEM packaging depending on supply. It targets IT teams running 24/7 databases, virtualisation hosts or transactional applications.

15mm bay integration

The unit measures 15mm in height, 76mm wide and 119mm long, so it slots into standard 2.5 inch 15mm drive bays and backplanes. A SAS 6Gb/s host bus adapter or RAID controller and a compatible backplane are required for connectivity. The single-connector SFF design frees the second bay position in dual-slot carriers for another drive. No tray is included, so the enclosure must supply its own mounting hardware.

Sustained 10K operation

At 10000 RPM the spindle maintains consistent throughput during extended read and write sequences typical of enterprise logs and OLTP databases. The SAS interface supports dual-port operation for multipath redundancy without performance loss during path failover. Mechanical latency stays predictable because the drive is engineered for continuous duty rather than burst-oriented desktop use. Heat output scales with sustained spindle speed, so the chassis must provide adequate airflow across the 15mm profile.

Kohokohdat

  • 2 TB capacity stores large enterprise datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 6Gb/s interface provides reliable connectivity
  • 5 inch 15 mm form factor fits dense servers
  • Built for enterprise storage workloads

Tekniset tiedot

BrandHP
Model697574-B21
InterfaceSAS 6Gb/s
Capacity1.2TB
RPM10000 RPM
UsageFor Enterprise Storage
Form Factor2.5"
Height (maximum)15mm
Width (maximum)76 mm
Length (maximum)119 mm
Lähetyspaino0.64 kg
Pakkauksen mitat152 × 102 × 51 mm

Kysymyksiä tästä tuotteesta

What sustained-throughput limit does the SAS 6Gb/s interface impose during heavy workloads?

The SAS 6Gb/s link caps sustained transfer at 6Gb/s, so long sequential reads or writes cannot exceed that bus bandwidth.

How much heat and noise does the 10000 RPM mechanism produce in 24/7 operation?

A 10000 RPM enterprise drive runs hotter and louder than slower spindles; plan for active airflow in the bay and expect audible seek noise under load.

Which controller or backplane must the system already provide for this 2.5″ 15mm drive to function?

The system needs a SAS 6Gb/s backplane or HBA with a 2.5″ 15mm drive bay and the correct SAS power and data connectors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.