Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A silver 2.5 inch enterprise SSD in an HP Gen8 tray

HP

HP VO003840JWZJK P15848-003 3.84TB SAS 12Gb/s 2.5in enterprise SSD

SKU CH-DGJY-4FPT0

A 3.84 TB enterprise SAS SSD delivering 2100 MB/s reads and 2000 MB/s writes with 1 DWPD endurance for read-intensive server workloads

  • Form Factor2.5"
  • Capacity3.84TB
  • InterfaceSAS 12Gb/s
  • Sustained Sequential Read2100 MB/s
  • Sustained Sequential Write2000 MB/s
  • Endurance1 DWPD
  • High capacity 3.84TB storage for data-intensive workloads
  • Fast sequential read 2100 MB/s accelerates data access
  • Sequential write 2000 MB/s supports heavy write workloads
  • 1 DWPD endurance rating ensures reliable daily operation
  • Power loss and end-to-end data protection safeguards integrity

3.84 TB SAS 12Gb/s enterprise SSD

This 2.5 inch drive delivers 3.84 TB of read-intensive storage over a SAS 12Gb/s link. It targets enterprise servers and storage arrays that need consistent sequential throughput for cloud, backup and analytics workloads.

Fits Gen8 to Gen10 ProLiant bays

The drive ships installed in an HP Gen8 tray compatible with ProLiant DL, ML, BL, SL and Synergy systems from Gen8 through Gen10. Hot-swap support and end-to-end data path protection let it slide into existing 2.5 inch bays without cabling changes.

Replaces lower-capacity SAS SSDs

Moving from smaller SAS SSDs to 3.84 TB at 1 DWPD consolidates capacity while keeping the same 2100 MB/s read and 2000 MB/s write envelope. The jump is worth it when capacity growth outpaces write endurance needs and the existing SAS backplane remains in place.

Kohokohdat

  • High capacity 3.84TB storage for data-intensive workloads
  • Fast sequential read 2100 MB/s accelerates data access
  • Sequential write 2000 MB/s supports heavy write workloads
  • 1 DWPD endurance rating ensures reliable daily operation
  • Power loss and end-to-end data protection safeguards integrity

Tekniset tiedot

BrandHP
SeriesGeneration 8
ModelVO003840JWZJK
Part NumberP15848-003
Form Factor2.5"
Capacity3.84TB
InterfaceSAS 12Gb/s
Sustained Sequential Read2100 MB/s
Sustained Sequential Write2000 MB/s
Endurance1 DWPD
MTBF2,000,000 hours
FeaturesPower Loss Protection, End-to-End Data Path Protection

Kysymyksiä tästä tuotteesta

Will the 1 DWPD endurance rating limit how long the drive lasts in a write-heavy workload?

The drive is rated for one full drive write per day, so sustained heavy writing will reach the endurance limit faster than lighter workloads.

How much heat or power does the SAS 12Gb/s interface generate during all-day operation?

The SAS 12Gb/s interface runs at enterprise power levels; expect typical heat output for a 2.5-inch SSD under continuous read and write loads.

Does the included Gen8 tray work with my existing server backplane?

The drive ships in an HP Gen8 tray compatible with Gen8, Gen9 and Gen10 ProLiant servers and listed storage arrays.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.