Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive with green circuit board visible

HPE

HPE 820032-001 8TB 3.5" SAS 12Gb/s 7200 RPM 512e internal hard drive

SKU CH-0HQD-TJPGT MPN 820032-001

An 8 TB internal hard drive with a 3.5 inch form factor, 7200 RPM spindle speed, 512e format and a 12 Gb/s SAS interface

  • InterfaceSAS
  • Capacity8TB
  • NAND Flash Memory TypeUser Input
  • RPM7200 RPM
  • Width (maximum)User Input
  • Length (maximum)100.6mm
  • 8 TB capacity stores large data sets
  • 12 Gb/s SAS interface enables fast transfers
  • 7200 RPM spindle speed delivers responsive performance
  • 512e disk format ensures broad compatibility
  • 5 inch form factor fits standard bays

HPE 8TB SAS 12Gb/s 3.5" internal drive

The HPE 820032-001 is an 8TB 3.5-inch internal hard drive with a 12Gb/s SAS interface and a 7200 RPM spindle speed. It uses a 512e disk format for broad compatibility with existing storage infrastructures. The drive is supplied new and intended for installation inside compatible servers or storage enclosures.

Suited for SAS-based arrays.

This drive suits administrators expanding SAS-based RAID arrays or JBOD enclosures that accept 3.5-inch internal drives. It is not suitable for laptops, external enclosures without a SAS backplane, or systems that lack a 12Gb/s SAS host bus adapter. Buyers who need a different interface or a smaller form factor should look at other products.

12Gb/s SAS interface decides compatibility

The single specification that decides whether this is the right part is the 12Gb/s SAS interface. The host system must provide a compatible SAS connector and controller that support this signalling rate. Without a matching SAS backplane or HBA the drive cannot communicate with the server.

Kohokohdat

  • 8 TB capacity stores large data sets
  • 12 Gb/s SAS interface enables fast transfers
  • 7200 RPM spindle speed delivers responsive performance
  • 512e disk format ensures broad compatibility
  • 5 inch form factor fits standard bays

Tekniset tiedot

BrandHP
Model820032-001
Part Number820032-001
InterfaceSAS
Capacity8TB
NAND Flash Memory TypeUser Input
RPM7200 RPM
Width (maximum)User Input
Length (maximum)100.6mm

Kysymyksiä tästä tuotteesta

How do I install the HPE 820032-001 8TB drive and what step is often missed?

Mount the 3.5" drive in a bay, connect the SAS data cable to a 12Gb/s SAS port and attach the power connector; the step often missed is confirming the controller firmware supports 512e format before first use.

What maintenance or replacement will the HPE 820032-001 8TB drive need later?

No scheduled maintenance is required; replacement is needed only if the 7200 RPM mechanism fails or capacity is exhausted after extended use.

What limit appears first on the HPE 820032-001 8TB drive under sustained use?

The 12Gb/s SAS interface bandwidth and 7200 RPM mechanical throughput set the sustained transfer ceiling during heavy workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.