Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server module with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Gold 5115 64GB DDR4 2x 1.8TB SAS

SKU CH-WAX5-9223B

Dual Xeon Gold 5115 blade server with 64GB DDR4 memory and two 1.8TB SAS drives in a 2.5-inch form factor

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.4 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size64GB
  • Dual Xeon Gold 5115 processors at 2.4 GHz deliver 20 cores for multi-threaded workloads
  • 64 GB DDR4 ECC memory supports virtualisation density with room to expand to 128 GB
  • Twin 1.8 TB SAS drives on Smart Array P204i-b SR controller provide redundant storage
  • Integrated iLO Advanced remote management enables out-of-band control and firmware updates
  • FlexFabric 20 Gb 2-port 650FLB adapter supplies high-throughput networking for blade environments

Blade server for dense compute

This HPE BL460c G10 blade server fits into a c-Class enclosure and delivers dual-socket performance for virtualization or database workloads. Two Xeon Gold 5115 processors run at 2.4 GHz with ten cores each and 13.75 MB cache. Sixty-four gigabytes of DDR4 ECC registered memory are installed, expandable to 128 GB. Dual 1.8 TB SAS hard drives connect through a Smart Array P204i-b SR controller. Integrated Lights-Out Advanced and a FlexFabric 20 Gb two-port adapter handle remote management and networking.

Suited for existing c-Class racks

IT teams that already operate HPE c-Class infrastructure can add compute density without new cabling or power architecture. The half-height blade supports up to two 2.5-inch drives and maxes out at two processors, so workloads that demand more local storage bays, additional CPU sockets, or discrete GPU acceleration will need a different form factor. Buyers without a compatible enclosure and interconnect modules cannot use this server.

Two 1.8 TB SAS drives and P204i-b controller

The installed storage consists of two 1.8 TB SAS hard drives managed by the Smart Array P204i-b SR Gen10 controller. This RAID engine determines the available redundancy levels and maximum logical volumes. Confirm that the drive count, interface, and controller feature set match the application requirements before purchase.

Kohokohdat

  • Dual Xeon Gold 5115 processors at 2.4 GHz deliver 20 cores for multi-threaded workloads
  • 64 GB DDR4 ECC memory supports virtualisation density with room to expand to 128 GB
  • Twin 1.8 TB SAS drives on Smart Array P204i-b SR controller provide redundant storage
  • Integrated iLO Advanced remote management enables out-of-band control and firmware updates
  • FlexFabric 20 Gb 2-port 650FLB adapter supplies high-throughput networking for blade environments

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.4 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size64GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

Which enclosure or c-Class chassis do I need to install this BL460c Gen10 blade?

This blade fits any HPE c-Class enclosure that accepts half-height Gen10 server blades and provides the required power and cooling.

Can I keep my existing SAS drives and RAID controller when adding this blade?

Yes, the on-board Smart Array P204i-b SR Gen10 controller manages the two 1.8 TB SAS drives and can also address external SAS storage you already own.

How do I verify the blade is healthy after it boots in the enclosure?

Open the iLO Advanced web interface; it shows CPU, memory, storage and firmware status plus a full diagnostic log confirming the blade passed burn-in tests.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.