Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5-inch SAS hard drive with hot-swap carrier handle

HPE

HPE C8S62A 1TB 2.5" 7200 RPM SAS 6G Dual Port Midline Hot Swap internal hard drive

SKU CH-A3K5-GH3AE

A 1 TB 2.5-inch midline SAS hard drive spinning at 7200 RPM with dual-port 6 Gb/s connectivity for hot-swap server bays

  • InterfaceSAS 6Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Form Factor2.5"
  • 1TB capacity for midline storage workloads
  • 7200 RPM spindle speed enables fast data access
  • SAS 6Gb/s dual-port interface provides path redundancy
  • 5-inch small form factor fits dense server bays
  • Hot-swap carrier allows drive replacement without downtime

1TB 2.5" SAS Hard Drive

The HPE C8S62A is a 1TB midline hard drive built for servers and storage arrays that need reliable capacity in a small form factor. Its 7200 RPM spindle and dual-port SAS 6Gb/s interface suit mixed workloads where consistent throughput matters more than peak speed.

Capacity and workload fit

One terabyte provides room for operating systems, databases and archival data on a single spindle. The 7200 RPM rotation handles sequential reads and moderate random I/O well, while the 6Gb/s SAS link keeps the bus from becoming a bottleneck under typical enterprise loads.

Carrier and connectivity

A hot-swap 2.5" SFF carrier lets technicians replace the drive without powering down the chassis. Dual SAS ports give path redundancy to the controller or expander, so a single cable or port failure does not take the volume offline.

Kohokohdat

  • 1TB capacity for midline storage workloads
  • 7200 RPM spindle speed enables fast data access
  • SAS 6Gb/s dual-port interface provides path redundancy
  • 5-inch small form factor fits dense server bays
  • Hot-swap carrier allows drive replacement without downtime

Tekniset tiedot

BrandHP
Part NumberC8S62A
InterfaceSAS 6Gb/s
Capacity1TB
RPM7200 RPM
Form Factor2.5"

Kysymyksiä tästä tuotteesta

Will this 2.5-inch SAS 6Gb/s drive work in a server that currently uses 3.5-inch SAS drives?

The drive uses a 2.5-inch small form factor and SAS 6Gb/s interface. It fits 2.5-inch hot-swap bays; a 3.5-inch bay requires a carrier adapter, which is not included.

How can I confirm the 7200 RPM midline drive is operating correctly after installation?

The drive reports its model C8S62A, 1TB capacity and SAS 6Gb/s link speed in the server BIOS or RAID controller utility. SMART data will show 7200 RPM spindle speed and dual-port status.

Does the C8S62A ship with a hot-swap carrier or tray, or must I buy one separately?

The drive is supplied as a bare 2.5-inch mechanism without a carrier. A compatible HPE hot-swap carrier or tray for your specific server model must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.