Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small silver 2.5 inch SAS hard drive with label showing 1.2 TB 10000 RPM

HPE

HPE J9F48A 1.2 TB SAS 12Gb/s 10000 RPM 2.5" internal hard drive

SKU CH-EQ5P-WN21R MPN J9F48A

A 1.2 TB 10000 RPM SAS 12Gb/s 2.5" enterprise hard drive built for server workloads

  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • NAND Flash Memory TypeHard Drives
  • RPM10000 RPM
  • FeaturesThis is an HP MSA 1.2TB SAS 12Gb/s Dual Port 10K RPM SFF 2.5
  • UsageIdeal for Servers
  • 2 TB capacity stores large datasets
  • SAS 12Gb/s interface enables fast data transfers
  • 10000 RPM spindle speed delivers quick access
  • 5 inch form factor fits dense server bays
  • Dual-port design provides path redundancy

1.2 TB dual-port SAS drive for servers

This HPE MSA enterprise drive delivers 1.2 TB of storage on a SAS 12Gb/s interface with dual-port connectivity for path redundancy. The 10,000 RPM spindle provides low latency for transactional workloads in 2.5-inch bays. It is built as an HP Qualified Option for managed storage arrays and server environments.

Capacity and sustained throughput headroom

The 1.2 TB capacity suits database logs, virtualisation images and mixed read/write workloads that benefit from 10K RPM mechanical speed. Performance scales with queue depth on the 12 Gbit/s link, but sequential throughput is limited by the physical spindle and will not match solid-state media. Workloads needing sub-millisecond latency or higher IOPS should consider flash alternatives.

Dual-port SAS and qualified firmware

Dual-port SAS enables multipath I/O and automatic failover without additional cabling. HP-qualified firmware ensures compatibility with MSA controllers and supported ProLiant servers, reducing integration risk. The drive ships in single-unit retail or OEM packaging; no mounting brackets, cables or management software are included in the box.

Kohokohdat

  • 2 TB capacity stores large datasets
  • SAS 12Gb/s interface enables fast data transfers
  • 10000 RPM spindle speed delivers quick access
  • 5 inch form factor fits dense server bays
  • Dual-port design provides path redundancy

Tekniset tiedot

BrandHP
SeriesMSA
ModelJ9F48A
InterfaceSAS 12Gb/s
Capacity1.2TB
NAND Flash Memory TypeHard Drives
RPM10000 RPM
FeaturesThis is an HP MSA 1.2TB SAS 12Gb/s Dual Port 10K RPM SFF 2.5" Enterprise Hard Drive.
UsageIdeal for Servers
Form Factor2.5"
Lähetyspaino2.72 kg
Pakkauksen mitat234 × 185 × 132 mm

Kysymyksiä tästä tuotteesta

Will the J9F48A 1.2 TB SAS 12Gb/s drive work in my older server that only has 6Gb/s SAS backplanes?

Yes, the SAS 12Gb/s interface negotiates down to 6Gb/s automatically, so the 1.2 TB drive will operate on your existing backplane at the lower speed.

How can I verify the 10000 RPM drive is healthy after installing it in my HPE MSA array?

Run the HPE Smart Storage Administrator surface scan and SMART test; a clean result with no reallocated sectors confirms the 10K RPM mechanism is functioning correctly.

Does the single-pack J9F48A include a 2.5" drive carrier or mounting screws for my server bay?

The single pack contains only the bare 2.5" enterprise hard drive; a compatible HPE drive carrier or caddy must be purchased separately for installation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.