Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive with green circuit board visible

HPE

HPE MB008000JWAYH 8TB 7.2K RPM 12Gb/s 3.5" SAS internal hard drive

SKU CH-NS8M-G9DJH

An 8 TB internal hard drive with a 12 Gb/s SAS interface and 7200 RPM spindle speed

  • 8 TB capacity stores large datasets and backups
  • 7200 RPM spindle speed supports steady read and write throughput
  • 12 Gb/s SAS interface enables fast data transfer to compatible controllers
  • 5 inch form factor fits standard server and workstation drive bays
  • 0 pound weight simplifies handling during installation and maintenance

8TB 12Gbps SAS Drive

The HPE MB008000JWAYH is an 8000GB internal hard drive with a 7200RPM spindle speed and a 12Gbps SAS interface in a 3.5in form factor. It is built for servers and storage arrays that require high-capacity, enterprise-class storage.

Who It Suits

This drive suits administrators expanding SAS-based RAID arrays, JBOD enclosures or backup targets that operate at 12Gbps. It is not for systems that lack a SAS host bus adapter or backplane, nor for laptops or small-form-factor PCs that only accept 2.5in drives.

Deciding Specification

The 12Gbps SAS interface is the single specification that decides compatibility; the drive must connect to a controller or backplane that supports this signalling rate. Without a 12Gbps SAS link the drive will not function.

Kohokohdat

  • 8 TB capacity stores large datasets and backups
  • 7200 RPM spindle speed supports steady read and write throughput
  • 12 Gb/s SAS interface enables fast data transfer to compatible controllers
  • 5 inch form factor fits standard server and workstation drive bays
  • 0 pound weight simplifies handling during installation and maintenance

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Does the HPE MB008000JWAYH ship with cables, brackets or a tray, or must they be purchased separately?

The drive is supplied as a bare 3.5" SAS unit; power and data cables, mounting brackets or server trays are not included and must be sourced separately.

The supplier title lists part numbers 861592-B21 and 861608-001 — which one should I order for an 8TB 12Gb/s SAS drive?

Both part numbers refer to the same 8TB 7200RPM 12Gb/s SAS model; either will deliver the identical MB008000JWAYH drive.

What sustained transfer rate can I expect from the 7200RPM platters once the drive is installed in a 12Gb/s SAS backplane?

The 12Gb/s SAS interface provides the link speed; actual sustained throughput is determined by the 7200RPM mechanical performance and workload pattern.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.