Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server chassis with front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen10 2x Xeon 5118 128GB DDR4 rack server

SKU CH-5VFX-W1STW

Dual Xeon 5118 2.3 GHz 12-core CPUs with 128 GB DDR4 ECC and P408 SAS RAID in a 2.5-inch 8-bay 2U rack chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size128GB
  • Dual 12-core Xeon 5118 CPUs at 2.3GHz deliver high multi-thread throughput
  • 128GB DDR4 ECC registered memory supports large virtualised workloads
  • HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
  • Dual 500W Flex Slot power supplies provide redundant power protection
  • Intel I350/X540 quad-port network card adds 2x 10GbE and 2x 1GbE connectivity

Dual-processor rack server for virtualised workloads

The HPE ProLiant DL380 Gen10 ships with two Xeon 5118 processors running at 2.3 GHz, each providing 12 cores and 16.5 MB cache. A total of 128 GB DDR4 ECC registered memory is installed across the 24 DIMM slots, leaving headroom for the 3 TB maximum capacity. The Smart Array P408 SAS controller manages up to eight 2.5-inch SATA drive bays, though no drives are included in this configuration.

Sustained throughput with redundant power

Dual 500 W Flex Slot power supplies share the load and maintain operation if one unit fails. The 2U chassis airflow design keeps both CPUs and the memory subsystem within thermal limits during continuous database or hypervisor activity. Intel I350 and X540 network adapters deliver two 10 GbE and two 1 GbE ports, providing consistent bandwidth for storage replication and VM migration without saturating the links.

Serviceable chassis with integrated remote

Tool-less rail mounting secures the 36 by 24 by 10 inch enclosure in standard racks, while the 40-pound weight requires two-person handling or a lift. HPE iLO Advanced gives full out-of-band control over power, console and firmware updates from any browser. The P408 controller supports SAS and SATA media, so drive selection can match capacity or endurance needs without changing the backplane.

Kohokohdat

  • Dual 12-core Xeon 5118 CPUs at 2.3GHz deliver high multi-thread throughput
  • 128GB DDR4 ECC registered memory supports large virtualised workloads
  • HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
  • Dual 500W Flex Slot power supplies provide redundant power protection
  • Intel I350/X540 quad-port network card adds 2x 10GbE and 2x 1GbE connectivity

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,68
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How loud and hot does the DL380 Gen10 run with two Xeon 5118 CPUs under sustained load?

The chassis uses redundant 500 W Flex Slot power supplies and is designed for continuous operation in standard rack environments; fan speed scales with thermal sensor readings from the processors and memory.

Which drives and caddies do I need to add before this server can boot?

The unit ships with no drives installed; it supports up to eight 2.5" SATA drives that connect to the Smart Array P408 SAS controller, so you must supply compatible drives and caddies.

Will my existing 2.5" SATA SSDs work with the P408 controller in this Gen10 chassis?

Yes, the P408 SAS controller supports SATA SSDs in the 2.5" drive bays, allowing you to reuse compatible drives you already own.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.