Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen11 2U rack server, dual Xeon 5416s 16-core 2.00 GHz, 512GB DDR5, 7.68TB SAS SSD

SKU CH-NQ7C-V70FM

A 2U rack server with dual 16-core Xeon 5416s processors, 512GB DDR5 memory and 7.68TB SAS SSD storage

  • Dual Xeon 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
  • 512GB DDR5-4800 ECC buffered memory in eight 64GB modules
  • 68TB SAS storage via four 1.92TB enterprise SSDs
  • Hot-swap redundant power supplies keep the server running during replacement
  • iLO 6 remote management with intelligent provisioning for simplified administration

HPE ProLiant DL380 Gen11 2U rack server

This HPE ProLiant DL380 Gen11 2U rack server delivers dual Xeon 5416s 16-core 2.00 GHz processors and 512GB DDR5 memory for demanding virtualization and database workloads. The 7.68TB SAS SSD array provides high-throughput storage. It is built for organizations that need expandable compute in a standard rack footprint. Buyers who require GPU-dense configurations or larger single-drive capacities should look elsewhere.

Dual redundant power supplies and hot-swap design

Redundant power supplies allow a failed unit to be replaced without taking the server offline. The 2U chassis uses forced-air cooling tuned for the dual-socket thermal envelope. Embedded 4-port 1GbE networking and iLO 6 remote management keep infrastructure overhead low. Power draw scales with the 16-core CPU load and DDR5 population.

Tool-less rail kit and OCP storage controller

The included rail kit enables tool-less mounting in standard 4-post racks for quick deployment. Four 2.5-inch SAS 12Gb/s SSDs install in hot-swap bays behind the front bezel. The MR408i-o Gen11 x8 lanes 4GB cache OCP storage controller manages RAID directly. Memory and drives ship separately and require installation before first boot.

Kohokohdat

  • Dual Xeon 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
  • 512GB DDR5-4800 ECC buffered memory in eight 64GB modules
  • 68TB SAS storage via four 1.92TB enterprise SSDs
  • Hot-swap redundant power supplies keep the server running during replacement
  • iLO 6 remote management with intelligent provisioning for simplified administration

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I install the eight 64GB DDR5-4800 ECC modules and the four 1.92TB SAS 12Gb/s SSDs, and what step is most often missed?

Seat each DIMM in the correct channel slots per CPU until the latches click, then insert the SSDs into the front 2.5-inch hot-swap bays. The step most often missed is applying the Windows Server 2022 Standard license after the OS install.

Which components will need replacement first, and on what schedule?

The dual hot-swap power supplies and system fans are the only field-replaceable units with a wear life; plan to swap a supply or fan module within 3-5 years. The SAS SSDs and DDR5 memory have no scheduled replacement interval.

What thermal or power limit appears first when both Xeon Gold 5416s CPUs run at 4.00 GHz turbo under sustained load?

The 2U chassis cooling capacity and the redundant power supply rating set the ceiling; the firmware will throttle the 16-core processors before either CPU hits its maximum turbo frequency continuously.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.