Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 2U rack server with front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen11 2U rack server, dual Xeon 5416s 16-core 2.00 GHz, 512GB DDR5, 7.68TB SAS SSD

SKU CH-NQ7C-V70FM

A 2U rack server with dual 16-core Xeon 5416s processors, 512GB DDR5 memory and 7.68TB SAS SSD storage

  • Dual Xeon 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
  • 512GB DDR5-4800 ECC buffered memory in eight 64GB modules
  • 68TB SAS storage via four 1.92TB enterprise SSDs
  • Hot-swap redundant power supplies keep the server running during replacement
  • iLO 6 remote management with intelligent provisioning for simplified administration

HPE ProLiant DL380 Gen11 2U rack server

This HPE ProLiant DL380 Gen11 2U rack server delivers dual Xeon 5416s 16-core 2.00 GHz processors and 512GB DDR5 memory for demanding virtualization and database workloads. The 7.68TB SAS SSD array provides high-throughput storage. It is built for organizations that need expandable compute in a standard rack footprint. Buyers who require GPU-dense configurations or larger single-drive capacities should look elsewhere.

Dual redundant power supplies and hot-swap design

Redundant power supplies allow a failed unit to be replaced without taking the server offline. The 2U chassis uses forced-air cooling tuned for the dual-socket thermal envelope. Embedded 4-port 1GbE networking and iLO 6 remote management keep infrastructure overhead low. Power draw scales with the 16-core CPU load and DDR5 population.

Tool-less rail kit and OCP storage controller

The included rail kit enables tool-less mounting in standard 4-post racks for quick deployment. Four 2.5-inch SAS 12Gb/s SSDs install in hot-swap bays behind the front bezel. The MR408i-o Gen11 x8 lanes 4GB cache OCP storage controller manages RAID directly. Memory and drives ship separately and require installation before first boot.

Poudarki

  • Dual Xeon 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
  • 512GB DDR5-4800 ECC buffered memory in eight 64GB modules
  • 68TB SAS storage via four 1.92TB enterprise SSDs
  • Hot-swap redundant power supplies keep the server running during replacement
  • iLO 6 remote management with intelligent provisioning for simplified administration

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I install the eight 64GB DDR5-4800 ECC modules and the four 1.92TB SAS 12Gb/s SSDs, and what step is most often missed?

Seat each DIMM in the correct channel slots per CPU until the latches click, then insert the SSDs into the front 2.5-inch hot-swap bays. The step most often missed is applying the Windows Server 2022 Standard license after the OS install.

Which components will need replacement first, and on what schedule?

The dual hot-swap power supplies and system fans are the only field-replaceable units with a wear life; plan to swap a supply or fan module within 3-5 years. The SAS SSDs and DDR5 memory have no scheduled replacement interval.

What thermal or power limit appears first when both Xeon Gold 5416s CPUs run at 4.00 GHz turbo under sustained load?

The 2U chassis cooling capacity and the redundant power supply rating set the ceiling; the firmware will throttle the 16-core processors before either CPU hits its maximum turbo frequency continuously.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.