NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
HUANANZHI
Dual-socket E-ATX board for two Xeon CPUs with sixteen DDR3 slots, multiple PCIe x16 and x8 lanes, dual Gigabit Ethernet and on-board VGA
The HUANANZHI X79 16D is an E-ATX motherboard built for dual Intel Xeon processors in LGA 2011 sockets. It targets builders assembling high-core-count workstations or render nodes that need massive memory capacity in a single chassis. The 12-layer PCB and 7+7 phase power delivery are engineered for sustained multi-socket loads.
Sixteen DDR3 DIMM slots support registered ECC, non-ECC or standard ECC modules at 1866, 1600, 1333 or 1066 MHz. Dual-channel architecture means memory must be populated in matched pairs per processor to reach rated bandwidth. Maximum supported capacity is 16 x 32 GB.
The board comfortably handles workloads that scale with core count and memory footprint such as virtualization hosts, offline rendering or scientific computing. It runs out of modern I/O headroom with only two SATA 3.0 ports, a single USB 3.0 header and PCIe 3.0 as the fastest expansion link.
| Brand | HUANANZHI |
|---|---|
| CPU Socket Type | Dual LGA 2011 |
| CPU Type | Dual Intel Xeon |
| Number of Processor Support | 2 |
| DDR Standard | DDR 333 (PC 2700) |
| DDR3 Standard | DDR3 1866 |
| Channel Supported | Dual Channel |
| ECC Supported | Non-ECC |
| PCI Express 4.0 x16 | 1 |
| PCI Express 3.0 x16 | 3 |
| PCI Express 2.0 x16 | 3 |
| PCI Express x16 | 3 x PCI Express x16 |
| PCI Express x8 | 2 x PCI Express x8 |
| USB 1.1/2.0 | 2 x USB 2.0 |
| USB 3.0 | 1 x USB 3.0 |
| Dimensions (W x L) | 12.3" x 13.4" |
The board provides 16 DDR3 slots and each slot accepts modules up to 32 GB, allowing very large memory configurations when fully populated with compatible sticks
One PCI Express 4.0 x16 slot is present alongside three PCI Express 3.0 x16 and three PCI Express 2.0 x16 slots, so the fastest link runs at 4.0 speeds while the others operate at their respective generation limits
The board measures 305 mm by 330 mm and uses the E-ATX form factor, so it requires a chassis that explicitly supports E-ATX motherboards and has matching standoff positions
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?