NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
HUANANZHI
LGA 2011-3 workstation board with eight DDR4 slots, four-channel memory, 7.1 audio, Gigabit Ethernet, M.2 and U.2 NVME, plus multiple PCIe 3.0 and 2.0 slots
The HUANANZHI X99 CH8 is an Intel motherboard built for the LGA 2011-3 socket. It accepts Xeon E5 V3 and V4 processors such as the 2640, 2666, 2670, 2678 and 2696. Eight DDR4 slots provide four-channel memory support at 2400, 2133 and 1866 MHz for both ECC and non-ECC modules. The board measures 300 by 240 mm and uses a 10-layer PCB with a 6-phase power design.
This board suits users building rendering nodes, virtualization hosts or storage servers that benefit from high core counts and quad-channel memory. It provides six SATA 3.0 ports, an M.2 NVMe slot (X4 3.0) and a U.2 port (X4 3.0) for fast storage arrays. Builds requiring modern consumer sockets, integrated wireless or newer platform features should consider current-generation alternatives.
The defining specification is the eight DDR4 DIMM slots wired for four-channel operation at up to 2400 MHz. This density allows large memory capacities essential for virtualization, scientific computing and large dataset workloads. Confirm that your chosen Xeon processor and memory kit match the supported speeds and ECC preference before purchase.
| Brand | HUANANZHI |
|---|---|
| Model | X99 CH8 |
| CPU Socket Type | LGA 2011 |
The board uses a 10-layer PCB with 6-phase power delivery and requires at least a 500 W supply to support high-wattage Xeon processors.
Five fan headers let you tune airflow for the VRM and drives; the 10-layer design spreads heat, but acoustic and thermal results depend on your cooler and case airflow.
You need a 24-pin ATX connector plus an 8-pin EPS connector to power the board.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?