ICY DOCK MB344SP 4 x 2.5" to 5.25" hdd accessory
- Black
- 1 x 5.25" Drive to…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ICY DOCK
Converts one 5.25" bay to hold one 3.5" drive or two 2.5" SATA drives with tool-less locking and a snap-off dust cover
Model Brackets 3BAY
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The ICY DOCK MB343SP converts a single 5.25 inch half-height bay into space for one 3.5 inch device or two 2.5 inch SATA drives. It accepts 2.5 inch drives between 7.00 and 9.50 millimetres thick. The adapter connects via standard SATA I, II and III interfaces.
The Smart-Tip locking mechanism secures a 3.5 inch drive without screws, while 2.5 inch SSDs slide in tool-free. A snap-off front dust cover keeps the opening clean when drives are absent. Systems without a 5.25 inch external bay cannot use this adapter.
One 5.25 inch bay hosts either a single 3.5 inch hard drive or a pair of 2.5 inch drives simultaneously. The choice of which drive combination to install determines the final storage layout.
| Brand | ICY DOCK |
|---|---|
| Model | MB343SP |
| Color | Black |
| Conversion Tray | 2.5" & 3.5" Drives to 5.25" Bay |
| Mobile Rack Drives Support | 1 x 3.5" device or hard drive or 2 x 2.5" IDE / SATA HDD & SSD (7 - 9.5mm) to 1 x External 5.25" half height device bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Multiple Drives |
| Compatible Products | 2.5" & 3.5" |
| Specifications | Drive Fit: 1 x 3.5" device or hard drive 2 x 2.5" IDE / SATA HDD & SSD (7.00 - 9.50mm) Material: Plastic Dimension: 1.63" x 5.85" x 6.69" Weight: 0.25 lb. |
| Package Contents | Device User Manual Screws |
| Features | Compatible with any standard 5.25" device bay Fits 1 x 3.5" device / hard drive & 2 x 2.5" HDD / SSD Durable one piece, lightweight construction Snap-off front panel dust cover Smart-Tip locking mechanism for screwless 3.5" device installation Screw-less installation design for 2.5" HDD / SSD slots Side screw holes for 3.5" hard drive installation Compatible with our 3.5" mobile racks and brackets |
| Lähetyspaino | 0.18 kg |
| Pakkauksen mitat | 191 × 157 × 53 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The tray uses SATA I/II/III connectors, so any installed drive runs at up to SATA III 6 Gb/s.
It mounts in one standard 5.25" half-height bay and holds one 3.5" drive or two 2.5" drives between 7.00 mm and 9.50 mm thick.
Slide a 3.5" drive in until the Smart-Tip locks it tool-lessly; for 2.5" drives, use the included screws — skipping the screws is the common mistake.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?