Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black metal enclosure holding two 2.5 inch drives in a single 3.5 inch bay

ICY DOCK

ICY DOCK MB742SPB 2 x 2.5" SAS/SATA HDD/SSD Mobile Rack for 3.5" Bay hdd accessory

SKU CH-M1YD-0ZH6X MPN MB742SPB

Holds two 2.5″ SATA or SAS drives in a single external 3.5″ bay with tool-less trays and all-metal ventilation

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives Support2 x 2.5" Drives to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model 2 x 2.5in (SATA)

  • 2 x 2.5in (SATA)
  • 4 x 2.5in
  • 1 Pack

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option Express Cages 2Bay

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Fits two 2.5" SATA or SAS drives in one 3.5" bay
  • Tool-less ExpressTray caddies enable fast drive swaps without screws
  • All-metal chassis with full ventilation keeps drives cool under load
  • Enhanced latch and grip mechanism secures drives during transport or vibration
  • Supports RAID 1 for data redundancy when paired with a RAID controller

Compact dual-drive enclosure

The ICY DOCK MB742SPB fits two 2.5 inch SATA or SAS solid-state drives or hard drives into a single external 3.5 inch bay. Tool-less caddies with a single-piece latch hold 5 mm, 7 mm and 9.5 mm drives securely without screws. Rugged metal housing and all-around ventilation keep drives cool under sustained workloads.

Ideal for space-constrained builds

System integrators working with small-form-factor PCs, embedded boxes, in-vehicle computers or home servers can add redundant or mirrored storage without sacrificing a 5.25 inch bay. Builders who need more than two drives or who lack a free external 3.5 inch opening should consider a larger enclosure.

9.5 mm maximum drive height

Only 2.5 inch drives 9.5 mm thick or thinner are supported by the ExpressTray caddies. Verify each drive’s z-height before purchase to ensure proper fit and latch engagement.

Kohokohdat

  • Fits two 2.5" SATA or SAS drives in one 3.5" bay
  • Tool-less ExpressTray caddies enable fast drive swaps without screws
  • All-metal chassis with full ventilation keeps drives cool under load
  • Enhanced latch and grip mechanism secures drives during transport or vibration
  • Supports RAID 1 for data redundancy when paired with a RAID controller

Tekniset tiedot

BrandICY DOCK
ModelMB742SPB
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support2 x 2.5" Drives to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsSupport Drive Size: 2.5" SSD / HDD
Compatible Drive Type: SATA / SAS (SAS host required / Single channel)
Number of Drives: 2
Max Drive Height: 9.5mm
Drive Bay: 1 x external 3.5" drive bay
Host Interface: 2 x SATA 7pin
Power Input: 1 x 15 pin SATA power connector
Transfer Rate: Up to 6Gbps (Depending on hard drive speed)
Support HDD Capacity: No Limitation
Structure / Material: Metal with partial plastic
Support Hot-Swap: Yes
FeaturesRugged metal housing with durable ABS caddies for maximum security and protection
Fits 2x 5mm, 7mm, & 9.5mm 2.5" SATA HDD/SSDs, and installs into a single 3.5" external bay (floppy bay)
Multi-Flow Technology – provides excellent passive cooling
Accommodates 2.5" drives with 5mm, 7mm & 9.5mm height
Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
Advanced ExpressCage drive caddy MB742TP-B with a new drive-gripping mechanism, strengthened
single-piece latch, and tool-less drive installation
Removable drive caddy system for easy maintenance
Sup
Lähetyspaino0.32 kg
Pakkauksen mitat142 × 109 × 38 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 2.5" version or a different capacity for my 3.5" bay?

This unit is built for two 2.5" drives up to 9.5 mm tall and fits a single external 3.5" bay, so choose it when you need dual SATA or SAS storage in that slot.

What does the dual-drive layout mean once installed in a real machine?

You gain two independent SATA or SAS drives in one floppy bay, ready for RAID 0, RAID 1 or JBOD configurations with a compatible controller.

The spec lists SATA I/II/III and SAS — what speed does that actually cap at?

SATA III tops out at 6 Gb/s per drive, while SAS speed depends on the host controller; the backplane itself does not limit either interface.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.