Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black metal mobile rack for two 2.5 inch drives and one 3.5 inch slot in a 5.25 inch bay with detachable dust cover

ICY DOCK

ICY DOCK MB322SP-B 2 x 2.5" SATA/SAS to 5.25" hdd accessory

SKU CH-41TY-EENV6 MPN MB322SP-B

Fits two 2.5″ SATA or SAS drives and one 3.5″ device into a single 5.25″ bay with hot-swap trays and a detachable dust cover

  • ColorBlack
  • Conversion Tray2.5" & 3.5" Drives to 5.25" Bay
  • Mobile Rack Drives Support2.5" & 3.5" Drives to 1 x 5.25" Bay
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseMultiple Drives
  • Compatible Products1 x 3.5" device or 1 x 3.5" hard drive (no backplane) 2 x 2.

Model 2 x 2.5in (SATA)

  • 2 x 2.5in (SATA)
  • 4 x 2.5in
  • 1 Pack

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option Express Cages 2Bay + HDD

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Hot-swap two 2.5" drives up to 9.5 mm height
  • Add a 3.5" drive or device in the same bay
  • Fits any standard 5.25" front bay
  • SATA 6 Gbps and SAS host support
  • Detachable dust cover keeps the front panel clean

Two-bay 5.25" mobile rack

The ICY DOCK MB322SP-B converts a single 5.25" bay into two hot-swap slots for 2.5" SATA or SAS drives between 7 mm and 9.5 mm thick. A third opening accepts one 3.5" drive or device without a backplane. The tray uses a tool-less design with optional screw holes for extra security.

Replaces fixed 3.5" cages

Builders who currently mount 2.5" drives in 3.5" adapters gain direct front access and hot-swap capability without opening the case. The upgrade is worthwhile when drive changes are frequent or when a 3.5" peripheral such as a card reader must share the same bay.

Fits standard 5.25" bays

The unit connects through two 7-pin SATA host ports and a single 15-pin SATA power connector. A detachable dust cover seals the 3.5" opening when unused. Blue activity LEDs on each 2.5" slot show drive status. Metal housing and reinforced latches handle repeated insertions.

Kohokohdat

  • Hot-swap two 2.5" drives up to 9.5 mm height
  • Add a 3.5" drive or device in the same bay
  • Fits any standard 5.25" front bay
  • SATA 6 Gbps and SAS host support
  • Detachable dust cover keeps the front panel clean

Tekniset tiedot

BrandICY DOCK
ModelMB322SP-B
ColorBlack
Conversion Tray2.5" & 3.5" Drives to 5.25" Bay
Mobile Rack Drives Support2.5" & 3.5" Drives to 1 x 5.25" Bay
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseMultiple Drives
Compatible Products1 x 3.5" device or 1 x 3.5" hard drive (no backplane)
2 x 2.5" SATA or SAS (single channel) HDD/SSD
SpecificationsHost Interface: 2 x 7pin SATA
Compatible 2.5" Drive Heights: 7mm, 9.5mm
Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed)
Power Input: Single 15pin SATA power port
Insert& Extract connection Via: Direct SAS / SATA hard drive connection
Structure: Plastic and metal
Power Indicator: Solid blue LED
HDD Access Indicator: Blinking blue LED
Dimension (L x W x H): 5.95" x 1.63" x 5.74"
Weight: 0.76 lb.
Lähetyspaino0.43 kg
Pakkauksen mitat165 × 165 × 56 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 5.25" cage fit a standard 5.25" bay in my case?

Yes, the unit is designed for any standard 5.25" device bay and occupies a single bay slot.

How do I install 2.5" drives without tools, and what step is often missed?

Slide each drive into an ExpressTray Mini until the SATA connectors engage fully; the optional bottom tray screws are often skipped but add stability.

Does the detachable dust cover need cleaning or replacement over time?

The cover is a passive plastic piece; wipe it with a dry cloth if dust builds up, but it has no moving parts that wear out.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.