Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Blue steel 2U rackmount server chassis with two front hot-swap drive bays

iStarUSA Inc.

iStarUSA Inc. D200ND-2T7SA-BL Blue 2U Rackmount Server Chassis 2 Hot-Swap Bays

SKU CH-SZA9-H71RP MPN D200ND-2T7SA-BL

A 2U rackmount steel chassis in blue that holds ATX or Micro ATX boards and provides two hot-swap 3.5-inch drive bays plus three expansion slots

  • Chassis TypeRackmount
  • Form Factor2U
  • ColorBlue
  • Case MaterialSteel
  • Motherboard CompatibilityATX / Micro ATX
  • External 3.5" Drive Bays2

Model D200ND-2T7SA-BL

  • Hot-swap bays let you replace drives without downtime
  • Two external 3.5" bays provide front-access storage expansion
  • 2U rackmount form factor fits standard server cabinets
  • Steel construction protects components in dense environments
  • Single 80mm fan delivers targeted airflow cooling

Compact 2U Server Chassis

The iStarUSA D200ND-2T7SA-BL is a blue 2U rackmount server chassis built from steel. It accepts ATX and Micro ATX motherboards and provides three expansion slots for add-in cards. Two external 3.5-inch bays are included alongside the hot-swap capability. A single 80mm fan handles airflow within the 20.8 by 19.0 by 3.5 inch frame.

Suited for dual hot-swap deployments

This chassis targets builders who need two hot-swap drive bays in a short-depth 2U rackmount form factor. The three expansion slots support essential controller or networking cards. It is not for deployments requiring more than two hot-swap bays or builds that need additional 80mm fan positions beyond the single included unit.

Two hot-swap drive bays

The defining specification is the pair of hot-swap drive bays, allowing drive replacement without powering down the server. This feature determines whether the chassis matches a high-availability storage requirement. Verify that two bays satisfy the storage plan before selecting this model.

Kohokohdat

  • Hot-swap bays let you replace drives without downtime
  • Two external 3.5" bays provide front-access storage expansion
  • 2U rackmount form factor fits standard server cabinets
  • Steel construction protects components in dense environments
  • Single 80mm fan delivers targeted airflow cooling

Tekniset tiedot

BrandiStarUSA
ModelD200ND-2T7SA-BL
Chassis TypeRackmount
Form Factor2U
ColorBlue
Case MaterialSteel
Motherboard CompatibilityATX / Micro ATX
External 3.5" Drive Bays2
Hot-Swap Drive Bays2
Expansion Slots3
80mm Fans1
Dimensions20.8" x 19.0" x 3.5"
Lähetyspaino14.76 kg
Pakkauksen mitat686 × 558 × 225 mm

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the box and do I need to buy rails separately?

The chassis includes mounting rails so no separate rail kit is required. You will still need to supply the motherboard, CPU, memory, power supply and drives.

Should I choose ATX or Micro ATX for this 2U chassis?

Both ATX and Micro ATX boards fit, but ATX uses the full width and all three expansion slots while Micro ATX leaves one slot unused.

What does the single 80 mm fan mean for airflow in a 20.8 inch deep rack?

One 80 mm fan provides basic front-to-rear cooling; high-wattage CPUs or full drive loads may need additional fans or a perforated door.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.