Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

KHACHIMO

KHACHIMO 7808N Poe Video Recorder Power Supply DPS-200PB-185A KSA-180S2-A

SKU CH-094G-WTHED

ATX power supply rated for 185 watts, tested working for Poe video recorder model 7808N

  • TypeATX
  • ATX form factor fits standard chassis layouts
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • 180 W / 185 W / 200 W ratings match recorder needs

180 W ATX Power Supply for PoE Recorders

This 180 W ATX unit is built as a direct replacement for the 7808N PoE video recorder. It carries the DPS-200PB-185A and KSA-180S2-A part references and is supplied new and tested working. The supply targets installers and system integrators who need a reliable drop-in module for existing recorder chassis.

Capacity and headroom: what it handles.

The 180 W output and 185 A rating on the primary rail cover the recorder's camera feeds and internal processing without strain. Headroom is limited to the rated maximum, so expansions that push total draw above 180 W will exceed the unit's capability. Buyers planning additional drives or higher-power cameras should verify their total load before relying on this supply.

Kohokohdat

  • ATX form factor fits standard chassis layouts
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • 180 W / 185 W / 200 W ratings match recorder needs

Tekniset tiedot

TypeATX

Kysymyksiä tästä tuotteesta

Will this DPS-200PB-185A unit power my older ATX motherboard that still uses a 20-pin main connector?

The supply follows the ATX form factor, so it fits the same mounting points and provides the standard 20+4 pin main connector used on older boards.

How can I verify the KSA-180S2-A is delivering stable power after I install it in my 7808N recorder?

Power on the recorder and check that all cameras show a live feed without flicker; the unit is tested working and rated for 180 W continuous output.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.