เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

KHACHIMO

KHACHIMO 7808N Poe Video Recorder Power Supply DPS-200PB-185A KSA-180S2-A

SKU CH-094G-WTHED

ATX power supply rated for 185 watts, tested working for Poe video recorder model 7808N

  • TypeATX
  • ATX form factor fits standard chassis layouts
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • 180 W / 185 W / 200 W ratings match recorder needs

180 W ATX Power Supply for PoE Recorders

This 180 W ATX unit is built as a direct replacement for the 7808N PoE video recorder. It carries the DPS-200PB-185A and KSA-180S2-A part references and is supplied new and tested working. The supply targets installers and system integrators who need a reliable drop-in module for existing recorder chassis.

Capacity and headroom: what it handles.

The 180 W output and 185 A rating on the primary rail cover the recorder's camera feeds and internal processing without strain. Headroom is limited to the rated maximum, so expansions that push total draw above 180 W will exceed the unit's capability. Buyers planning additional drives or higher-power cameras should verify their total load before relying on this supply.

จุดเด่น

  • ATX form factor fits standard chassis layouts
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • 180 W / 185 W / 200 W ratings match recorder needs

ข้อมูลจำเพาะ

TypeATX

คำถามเกี่ยวกับสินค้านี้

Will this DPS-200PB-185A unit power my older ATX motherboard that still uses a 20-pin main connector?

The supply follows the ATX form factor, so it fits the same mounting points and provides the standard 20+4 pin main connector used on older boards.

How can I verify the KSA-180S2-A is delivering stable power after I install it in my 7808N recorder?

Power on the recorder and check that all cameras show a live feed without flicker; the unit is tested working and rated for 180 W continuous output.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที