KingSpec
KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
63,99 $
0.00080095BTC
Varastossa
KingSpec
KingSpec NT-4TB-2280 4TB M.2 2280 SATA internal SSD
A 4 TB M.2 2280 SATA internal SSD with 3D NAND, up to 550 MBps read and 500 MBps write, and no heatsink
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D NAND
- InterfaceSATA III
Model NT-4TB-2280
- NT-1TB-2242
- NT-1TB-2280
- NT-2TB-2242
- NT-2TB-2280
- NT-4TB-2280
- NT-512-2280
- Up to 550 MB/s sequential read for fast boot and app loads
- Up to 500 MB/s sequential write for quick file saves and transfers
- 4 TB capacity stores large media libraries and project files
- 3D NAND technology delivers 1,000,000-hour MTBF for long-term reliability
- M.2 2280 form factor fits laptops, ultrabooks and desktops with SATA B-key slots
Capacity and Form Factor
This KingSpec NT-4TB-2280 is a 4TB internal SSD built in the M.2 2280 form factor. It uses a SATA III interface with 3D NAND memory for consumer storage upgrades in desktops, laptops and ultrabooks.
Upgrade Path and Value
The drive replaces a smaller SATA M.2 module or a 2.5-inch SATA SSD when more capacity is needed without changing the interface. Sequential reads reach up to 550 MBps and writes up to 500 MBps, so the jump is worthwhile when the current SATA drive is full or too slow for daily workloads.
Compatibility Checklist
Verify that the motherboard or laptop provides an M.2 slot keyed for SATA (B key) and not for NVMe (M key). The module measures 22.00 mm wide, 80.00 mm long and 3.50 mm thick, and it operates from 0°C to 70°C.
Kohokohdat
- Up to 550 MB/s sequential read for fast boot and app loads
- Up to 500 MB/s sequential write for quick file saves and transfers
- 4 TB capacity stores large media libraries and project files
- 3D NAND technology delivers 1,000,000-hour MTBF for long-term reliability
- M.2 2280 form factor fits laptops, ultrabooks and desktops with SATA B-key slots
Tekniset tiedot
| Brand | KingSpec |
|---|---|
| Series | NT 2280 Series |
| Model | NT-4TB-2280 |
| Part Number | NT-4TB-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 500 MBps |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Height | 80.00mm |
| Width | 22.00mm |
| Depth | 3.50mm |
Tämän mallin muut versiot
5 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
KingSpec
KingSpec NT-1TB-2242 1TB M.2 SATA 2242 internal SSD
- Internal Solid Stat…
- Consumer
102,99 $
0.0012891BTC
Varastossa
KingSpec
KingSpec NT-1TB-2280 1TB internal SSD M.2 2280 SATA
- Internal Solid Stat…
- Consumer
105,99 $
0.00132665BTC
Varastossa
KingSpec
KingSpec NT-2TB-2280 2TB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
168,99 $
0.0021152BTC
VarastossaKysymyksiä tästä tuotteesta
Will the 80.00 mm length and 22.00 mm width fit my motherboard M.2 slot?
The drive follows the M.2 2280 form factor, so any motherboard with an M.2 slot that accepts 80 mm long modules will accommodate it.
Which keying does the SATA III 6 Gbps interface require for correct installation?
The module uses a B-key edge connector; insert it into an M.2 slot wired for SATA, not an M-key NVMe slot, and secure it with the motherboard standoff screw.
Does the 3D NAND drive need any firmware updates or thermal pad replacement over its 1,000,000 hour MTBF life?
No user-serviceable parts are present; the included cooling sticker handles heat dissipation and the drive has no moving components that require periodic maintenance.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
