KingSpec
KingSpec VP14000 1TB internal SSD
- Internal Solid Stat…
- Consumer
150,99 $
0.00186164BTC
Varastossa
KingSpec
KingSpec VP14000 2TB PCIe 5.0 x4 M.2 2280 internal SSD
2 TB PCIe 5.0 x4 M.2 2280 internal SSD with sequential reads up to 14782 MB/s, writes up to 12914 MB/s and 1200 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D TLC
- InterfacePCI-Express 5.0 x4
- PCIe 5.0 x4 interface delivers up to 14,782 MB/s sequential read for AI workloads
- Up to 12,914 MB/s sequential write accelerates heavy-duty workstation tasks
- 1,148,000 IOPS random read and 1,038,000 IOPS random write cut game load latency
- 3D TLC NAND with 1,200 TBW and 1,000,000-hour MTBF ensures long-term reliability
- Backward compatible with PCIe 4.0 platforms in M.2 2280 form factor for broad upgrades
Capacity and workload fit
The 2 TB drive targets consumer desktops, laptops and PS5 consoles that need space for large game libraries, AI datasets or creative projects. It uses 3D TLC NAND to balance speed and endurance for heavy daily use.
Interface limits and backward compatibility
The SSD runs on a PCIe 5.0 x4 link with NVMe 2.0 protocol and falls back to PCIe 4.0 platforms without firmware changes. Sequential throughput reaches 14,782 MB/s read and 12,914 MB/s write on a 5.0 host.
Endurance headroom and thermal behaviour
Rated at 1,200 TBW and 1,000,000 hours MTBF, the drive sustains long write-heavy workloads before wear becomes a concern. An ultra-thin graphene layer handles cooling so active power stays at 5.9 W without a bulky heatsink.
Kohokohdat
- PCIe 5.0 x4 interface delivers up to 14,782 MB/s sequential read for AI workloads
- Up to 12,914 MB/s sequential write accelerates heavy-duty workstation tasks
- 1,148,000 IOPS random read and 1,038,000 IOPS random write cut game load latency
- 3D TLC NAND with 1,200 TBW and 1,000,000-hour MTBF ensures long-term reliability
- Backward compatible with PCIe 4.0 platforms in M.2 2280 form factor for broad upgrades
Tekniset tiedot
| Brand | KingSpec |
|---|---|
| Series | VP Series |
| Model | VP14000 |
| Part Number | VP14000-2TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 14782 MBps |
| Max Sequential Write | Up to 12914 MBps |
| 4KB Random Read | Up to 1148,000 IOPS |
| 4KB Random Write | Up to 1038,000 IOPS |
| Terabytes Written (TBW) | 1200TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1W |
| Power Consumption (Active) | 5.9W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 50g |
Tämän mallin muut versiot
2 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
KingSpec
KingSpec VP14000 4TB PCIe 5.0 x4 M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
463,99 $
0.00572079BTC
VarastossaKysymyksiä tästä tuotteesta
How does the 2 TB capacity fit into the VP14000 range?
The VP14000 series scales up to 4 TB, so the 2 TB model sits at the midpoint, offering half the maximum capacity while keeping the same PCIe 5.0 x4 interface and 3D TLC NAND.
What does the 14 782 MB/s sequential read figure mean once the drive is installed?
That 14 782 MB/s is the peak sequential read speed under ideal conditions; real-world throughput will be lower and depends on workload, motherboard PCIe 5.0 lane allocation and thermal headroom.
What does the PCIe 5.0 x4 NVMe 2.0 interface cap in practice?
The x4 link limits theoretical bandwidth to the PCIe 5.0 ceiling, and the drive is backward compatible with PCIe 4.0 platforms where speeds will drop to that generation's maximum.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
