Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two silver-white DDR5 modules with RGB lighting and heat spreaders

Kingston Technology Corp.

Kingston Technology Corp. FURY Beast 64GB (2×32GB) DDR5-6000 CL36 KF560C36BWEAK2-64 desktop RAM

SKU CH-MY7N-8TKW0 MPN KF560C36BWEAK2-64

Dual-channel 64 GB DDR5-6000 kit with CL36 timing, 1.35 V operation and RGB heat spreaders for high-performance desktop builds

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL36
  • Timing36-38-38-74
  • Voltage1.35V

Capacity 64GB (2 x 32GB)

Speed DDR5 6000 (PC5 48000)

CAS Latency CL36

Color White

  • Black
  • White
  • Silver / Black
  • Silver / White

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • 64 GB dual-channel capacity for heavy multitasking
  • DDR5 6000 speed moves data at 48000 MT/s
  • CL36 latency with 36-38-38-74 timings cuts response delay
  • 35 V operation keeps power draw low
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

FURY Beast 64GB DDR5-6000 Kit

This Kingston FURY Beast kit provides 64GB of DDR5 memory across two 32GB modules. It runs at 6000 MT/s with a CAS latency of CL36 and timings of 36-38-38-74 at 1.35V. The modules feature a silver and white heat spreader with RGB lighting.

Suits high-capacity gaming and workstation builds

The dual-channel kit targets users who need 64GB for intensive multitasking, content creation or high-performance gaming on platforms supporting DDR5-6000. Builders requiring lower capacities, different speeds or non-RGB aesthetics should consider alternative kits.

Verify DDR5 motherboard and CPU support

Confirm your motherboard has 288-pin DDR5 slots and that your processor officially supports DDR5-6000 operation. Ensure the BIOS is updated for Intel XMP 3.0 or AMD EXPO profile activation to achieve the rated speed and timings.

Kohokohdat

  • 64 GB dual-channel capacity for heavy multitasking
  • DDR5 6000 speed moves data at 48000 MT/s
  • CL36 latency with 36-38-38-74 timings cuts response delay
  • 35 V operation keeps power draw low
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

Tekniset tiedot

BrandKingston
SeriesFURY Beast
ModelKF560C36BWEAK2-64
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL36
Timing36-38-38-74
Voltage1.35V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ColorSilver / White
Heat SpreaderYes
FeaturesKingston FURY KF560C36BBEAK2-32 is a kit of two 2G x 64-bit
(16GB) DDR5-6000 CL36 SDRAM (Synchronous DRAM) 1Rx8,
memory module, based on eight 2G x 8-bit FBGA components per
module. Each module kit supports AMD® EXPO v1.0 and
Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit
capacity is 32GB. Each module has been tested to run at
DDR5-6000 at a low latency timing of 36-38-38 at 1.35V. The
SPDs are programmed to JEDEC standard latency
DDR5-4800 timing of 40-39-39 at 1.1V.
Recommend UseAMD & Intel Compatible / High Performance or Gaming Memory / Intel Compatible
LED ColorRGB
Lähetyspaino0.11 kg
Pakkauksen mitat152 × 121 × 13 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the DDR5-6000 CL36 64GB kit run in my motherboard that only has DDR5 slots?

The modules are 288-pin DDR5 DIMMs and require a motherboard with DDR5 slots and a CPU memory controller that supports DDR5-6000.

Can I run the Intel XMP 3.0 or AMD EXPO profiles on this kit if I keep my existing DDR5 memory installed?

Mixing this CL36 1.35V kit with other DDR5 modules may prevent the XMP 3.0 or EXPO profiles from applying; identical kits are recommended for stable dual-channel operation.

How can I confirm the kit is running at DDR5-6000 with CL36-38-38-74 timings after I enable the profile?

Open the BIOS or a tool such as CPU-Z and verify the DRAM frequency shows 6000 MT/s with timings 36-38-38-74 at 1.35V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.