Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Kingston Technology Corp.

Kingston Technology Corp. FURY Beast 64GB (2×32GB) DDR5-6000 CL36 KF560C36BWEAK2-64 desktop RAM

SKU CH-MY7N-8TKW0 MPN KF560C36BWEAK2-64

Dual-channel 64 GB DDR5-6000 kit with CL36 timing, 1.35 V operation and RGB heat spreaders for high-performance desktop builds

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL36
  • Timing36-38-38-74
  • Voltage1.35V

Capacity 64GB (2 x 32GB)

Speed DDR5 6000 (PC5 48000)

CAS Latency CL36

Color White

  • Black
  • White
  • Silver / Black
  • Silver / White

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 64 GB dual-channel capacity for heavy multitasking
  • DDR5 6000 speed moves data at 48000 MT/s
  • CL36 latency with 36-38-38-74 timings cuts response delay
  • 35 V operation keeps power draw low
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

FURY Beast 64GB DDR5-6000 Kit

This Kingston FURY Beast kit provides 64GB of DDR5 memory across two 32GB modules. It runs at 6000 MT/s with a CAS latency of CL36 and timings of 36-38-38-74 at 1.35V. The modules feature a silver and white heat spreader with RGB lighting.

Suits high-capacity gaming and workstation builds

The dual-channel kit targets users who need 64GB for intensive multitasking, content creation or high-performance gaming on platforms supporting DDR5-6000. Builders requiring lower capacities, different speeds or non-RGB aesthetics should consider alternative kits.

Verify DDR5 motherboard and CPU support

Confirm your motherboard has 288-pin DDR5 slots and that your processor officially supports DDR5-6000 operation. Ensure the BIOS is updated for Intel XMP 3.0 or AMD EXPO profile activation to achieve the rated speed and timings.

Přednosti

  • 64 GB dual-channel capacity for heavy multitasking
  • DDR5 6000 speed moves data at 48000 MT/s
  • CL36 latency with 36-38-38-74 timings cuts response delay
  • 35 V operation keeps power draw low
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

Specifikace

BrandKingston
SeriesFURY Beast
ModelKF560C36BWEAK2-64
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL36
Timing36-38-38-74
Voltage1.35V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ColorSilver / White
Heat SpreaderYes
FeaturesKingston FURY KF560C36BBEAK2-32 is a kit of two 2G x 64-bit
(16GB) DDR5-6000 CL36 SDRAM (Synchronous DRAM) 1Rx8,
memory module, based on eight 2G x 8-bit FBGA components per
module. Each module kit supports AMD® EXPO v1.0 and
Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit
capacity is 32GB. Each module has been tested to run at
DDR5-6000 at a low latency timing of 36-38-38 at 1.35V. The
SPDs are programmed to JEDEC standard latency
DDR5-4800 timing of 40-39-39 at 1.1V.
Recommend UseAMD & Intel Compatible / High Performance or Gaming Memory / Intel Compatible
LED ColorRGB
Přepravní hmotnost0.11 kg
Rozměry balení152 × 121 × 13 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the DDR5-6000 CL36 64GB kit run in my motherboard that only has DDR5 slots?

The modules are 288-pin DDR5 DIMMs and require a motherboard with DDR5 slots and a CPU memory controller that supports DDR5-6000.

Can I run the Intel XMP 3.0 or AMD EXPO profiles on this kit if I keep my existing DDR5 memory installed?

Mixing this CL36 1.35V kit with other DDR5 modules may prevent the XMP 3.0 or EXPO profiles from applying; identical kits are recommended for stable dual-channel operation.

How can I confirm the kit is running at DDR5-6000 with CL36-38-38-74 timings after I enable the profile?

Open the BIOS or a tool such as CPU-Z and verify the DRAM frequency shows 6000 MT/s with timings 36-38-38-74 at 1.35V.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.