Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Kingston Technology Corp.

Kingston Technology Corp. KF548R36RB-16 16GB DDR5 4800 CL36 ECC Registered server RAM

SKU CH-J50T-XJQN9 MPN KF548R36RB-16

16GB DDR5 4800 CL36 ECC Registered RDIMM with XMP 3.0 and heat spreader

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL36
  • Timing36-38-38
  • Voltage1.10V

Rank 1Rx8

  • 16 GB capacity handles heavy workloads smoothly
  • DDR5 4800 speed transfers data efficiently
  • CL36 latency with 36-38-38 timings delivers responsive cycles
  • ECC registered design protects data integrity
  • Intel XMP 3.0 profiles enable automatic tuning

16 GB DDR5-4800 CL36 Registered ECC Module

This single 16 GB DDR5 RDIMM runs at 4800 MHz with CL36-38-38 timings at 1.10 V. It is built for workstations and high-end desktops that require registered ECC memory for data integrity.

Registered Signal with On-Board Heat Spreader

Registered buffering reduces electrical load on the memory controller, allowing stable operation in dense configurations. The integrated heat spreader helps maintain consistent thermals during sustained workloads.

Upgrade from Non-ECC or Lower-Speed DDR5

Replacing unbuffered non-ECC modules adds multi-bit error correction and registered signalling for critical data tasks. The jump is worthwhile when your platform mandates RDIMMs or when workloads demand verified data accuracy over raw latency.

Kohokohdat

  • 16 GB capacity handles heavy workloads smoothly
  • DDR5 4800 speed transfers data efficiently
  • CL36 latency with 36-38-38 timings delivers responsive cycles
  • ECC registered design protects data integrity
  • Intel XMP 3.0 profiles enable automatic tuning

Tekniset tiedot

BrandKingston
SeriesFury Renegade Pro
ModelKF548R36RB-16
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL36
Timing36-38-38
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitSingle channel
BIOS/Performance ProfileIntel XMP 3.0
Heat SpreaderYes
FeaturesKingston FURY KF548R36RB-16 is a 2G x 80-bit (16GB)
DDR5-4800 CL36 SDRAM (Synchronous DRAM) 1Rx8, ECC
memory module, based on ten 2G x 8-bit FBGA components per
module. The module supports Intel® Extreme Memory
Profiles (Intel® XMP) 3.0. Each module has been tested to run
at DDR5-4800 at a low latency timing of 36-38-38 at 1.1V.
Lähetyspaino0.02 kg
Pakkauksen mitat140 × 51 × 13 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What speed and bandwidth does the DDR5 4800 interface deliver on this module?

The DDR5 4800 interface runs at 4800 MHz with a PC5 38400 data rate, providing high throughput for workstation workloads.

What physical slot and pin count does this 288-pin DDR5 RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot; the registered design and 1.10 V operation match server and workstation motherboards that support registered memory.

How do I enable the Intel XMP 3.0 profile on this Kingston FURY module?

Enter the BIOS, locate the XMP 3.0 setting for the installed DIMM, select the 4800 MHz profile, save and reboot; the module will then run at CL36 36-38-38 timings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.