Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Kingston Technology Corp.

Kingston Technology Corp. KF548R36RB-16 16GB DDR5 4800 CL36 ECC Registered server RAM

SKU CH-J50T-XJQN9 MPN KF548R36RB-16

16GB DDR5 4800 CL36 ECC Registered RDIMM with XMP 3.0 and heat spreader

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL36
  • Timing36-38-38
  • Voltage1.10V

Rank 1Rx8

  • 16 GB capacity handles heavy workloads smoothly
  • DDR5 4800 speed transfers data efficiently
  • CL36 latency with 36-38-38 timings delivers responsive cycles
  • ECC registered design protects data integrity
  • Intel XMP 3.0 profiles enable automatic tuning

16 GB DDR5-4800 CL36 Registered ECC Module

This single 16 GB DDR5 RDIMM runs at 4800 MHz with CL36-38-38 timings at 1.10 V. It is built for workstations and high-end desktops that require registered ECC memory for data integrity.

Registered Signal with On-Board Heat Spreader

Registered buffering reduces electrical load on the memory controller, allowing stable operation in dense configurations. The integrated heat spreader helps maintain consistent thermals during sustained workloads.

Upgrade from Non-ECC or Lower-Speed DDR5

Replacing unbuffered non-ECC modules adds multi-bit error correction and registered signalling for critical data tasks. The jump is worthwhile when your platform mandates RDIMMs or when workloads demand verified data accuracy over raw latency.

Přednosti

  • 16 GB capacity handles heavy workloads smoothly
  • DDR5 4800 speed transfers data efficiently
  • CL36 latency with 36-38-38 timings delivers responsive cycles
  • ECC registered design protects data integrity
  • Intel XMP 3.0 profiles enable automatic tuning

Specifikace

BrandKingston
SeriesFury Renegade Pro
ModelKF548R36RB-16
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL36
Timing36-38-38
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitSingle channel
BIOS/Performance ProfileIntel XMP 3.0
Heat SpreaderYes
FeaturesKingston FURY KF548R36RB-16 is a 2G x 80-bit (16GB)
DDR5-4800 CL36 SDRAM (Synchronous DRAM) 1Rx8, ECC
memory module, based on ten 2G x 8-bit FBGA components per
module. The module supports Intel® Extreme Memory
Profiles (Intel® XMP) 3.0. Each module has been tested to run
at DDR5-4800 at a low latency timing of 36-38-38 at 1.1V.
Přepravní hmotnost0.02 kg
Rozměry balení140 × 51 × 13 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What speed and bandwidth does the DDR5 4800 interface deliver on this module?

The DDR5 4800 interface runs at 4800 MHz with a PC5 38400 data rate, providing high throughput for workstation workloads.

What physical slot and pin count does this 288-pin DDR5 RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot; the registered design and 1.10 V operation match server and workstation motherboards that support registered memory.

How do I enable the Intel XMP 3.0 profile on this Kingston FURY module?

Enter the BIOS, locate the XMP 3.0 setting for the installed DIMM, select the 4800 MHz profile, save and reboot; the module will then run at CL36 36-38-38 timings.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.