Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four black DDR5 RDIMM modules with aluminium heat spreaders, 288-pin, quad-channel kit

Kingston Technology Corp.

Kingston Technology Corp. KF568R34RBK4-64 64GB (4×16GB) DDR5-6800 CL34 ECC Registered server RAM

SKU CH-QWMK-877VP MPN KF568R34RBK4-64

A 64 GB quad-channel DDR5-6800 kit with CL34 ECC registered modules for data-integrity workloads

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6800 (PC5 54400)
  • CAS LatencyCL34
  • Timing34-44-44
  • Voltage1.40V

Capacity 64GB (4 x 16GB)

Speed DDR5 6800 (PC5 54400)

Rank 1Rx8

  • 64 GB capacity handles heavy workloads with four 16 GB modules
  • DDR5 6800 MHz speed moves data fast for demanding applications
  • CL34 low latency cuts access delays for responsive performance
  • ECC registered design corrects errors to protect data integrity
  • 288-pin RDIMM form factor fits compatible server and workstation platforms

High-speed ECC registered memory kit

Kingston FURY Renegade Pro delivers 64 GB across four 16 GB DDR5 RDIMMs. Each module runs at 6800 MT/s with CL34-44-44 timings at 1.40 V. Registered signal processing and on-die ECC protect data integrity on supported workstation and high-end desktop platforms. The quad-channel kit includes aluminium heat spreaders on every module.

Replaces slower registered DDR5 or non-ECC kits

The jump is worthwhile when workloads demand both error correction and 6800 MT/s bandwidth. Single-rank 1Rx8 organisation keeps latency low while registered buffering maintains stability at density. Builders moving from standard JEDEC speeds or unbuffered memory gain the reliability required for sustained compute tasks.

Suits creators, engineers and data scientists

Professionals needing registered ECC memory with overclockable headroom will benefit. Buyers whose platforms only accept unbuffered UDIMMs cannot use this kit. Systems limited to lower DDR5 speeds or without XMP/EXPO support will not reach the rated frequency. Those requiring larger per-module capacities should consider alternative densities.

Přednosti

  • 64 GB capacity handles heavy workloads with four 16 GB modules
  • DDR5 6800 MHz speed moves data fast for demanding applications
  • CL34 low latency cuts access delays for responsive performance
  • ECC registered design corrects errors to protect data integrity
  • 288-pin RDIMM form factor fits compatible server and workstation platforms

Specifikace

BrandKingston
SeriesFury Renegade Pro
ModelKF568R34RBK4-64
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6800 (PC5 54400)
CAS LatencyCL34
Timing34-44-44
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitQuad Channel Kit
Heat SpreaderYes
FeaturesKingston FURY KF568R34RBK4-64 is a kit of four 2G x 80-bit (16GB) DDR5-6800 CL34 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6800 at a low latency timing of 34-44-44 at 1.4V.
Přepravní hmotnost0.11 kg
Rozměry balení170 × 105 × 38 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the 288-pin DDR5 RDIMM form factor fit standard server DIMM slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor designed for registered DIMM slots in compatible workstation and server motherboards.

How do I enable the DDR5-6800 speed and CL34 timings during installation?

Enable the appropriate XMP or EXPO profile in the BIOS after seating all four modules; the kit stores the 6800 MT/s, CL34-44-44, 1.40 V profile for automatic configuration.

When should the ECC registered modules be replaced in a production server?

Replace modules if the system logs uncorrectable ECC errors or repeated correctable errors that exceed your platform's RAS thresholds, indicating DRAM degradation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.