NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
16 GB DDR4-3200 ECC registered DIMM with CL22 latency for server stability
This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V operation. It is built for servers that require error-correcting code and registered signal processing. The single-rank 1Rx4 organisation fits 288-pin DDR4 slots. Intel XMP 2.0 profile support is included.
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors to maintain data integrity under heavy workloads. The module operates at standard JEDEC voltage without a heat spreader. Single-rank design allows predictable timing at the rated 3200 MHz speed.
Verify that your motherboard supports DDR4 registered ECC memory and 288-pin DIMM slots. Confirm the platform accepts 1.20 V modules and can run at 3200 MHz or will downclock automatically. Ensure the BIOS recognises Intel XMP 2.0 profiles if you plan to use them. This module is not for systems that require unbuffered non-ECC memory.
| Brand | Kingston |
|---|---|
| Model | KTH-PL432/16G |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Lähetyspaino | 0.03 kg |
| Pakkauksen mitat | 140 × 44 × 6 mm |
The module operates at 1.20 volts, the standard DDR4 voltage, keeping power draw low during continuous server workloads.
A DDR4 288-pin DIMM slot and a server-class platform that enables registered ECC memory are required.
The module runs at DDR4-3200 CL22 with an XMP 2.0 profile; the system will negotiate the highest common speed across all installed DIMMs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?