Kingston Technology Corp.
Kingston Technology Corp. KTH-PL432/16G 16GB DDR4-3200 CL22 ECC Registered server RAM
16 GB DDR4-3200 ECC registered DIMM with CL22 latency for server stability
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- 16 GB capacity supports large server workloads
- DDR4-3200 speed delivers 25600 MT/s data rate
- ECC registered design detects and corrects memory errors
- Single-rank 1Rx4 layout optimises signal integrity
- 20 V operation reduces power draw per module
Kingston 16 GB DDR4-3200 ECC Registered DIMM
This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V operation. It is built for servers that require error-correcting code and registered signal processing. The single-rank 1Rx4 organisation fits 288-pin DDR4 slots. Intel XMP 2.0 profile support is included.
Sustained load behaviour
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors to maintain data integrity under heavy workloads. The module operates at standard JEDEC voltage without a heat spreader. Single-rank design allows predictable timing at the rated 3200 MHz speed.
Pre-purchase checks
Verify that your motherboard supports DDR4 registered ECC memory and 288-pin DIMM slots. Confirm the platform accepts 1.20 V modules and can run at 3200 MHz or will downclock automatically. Ensure the BIOS recognises Intel XMP 2.0 profiles if you plan to use them. This module is not for systems that require unbuffered non-ECC memory.
I korthet
- 16 GB capacity supports large server workloads
- DDR4-3200 speed delivers 25600 MT/s data rate
- ECC registered design detects and corrects memory errors
- Single-rank 1Rx4 layout optimises signal integrity
- 20 V operation reduces power draw per module
Specifikationer
| Brand | Kingston |
|---|---|
| Model | KTH-PL432/16G |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Fraktvikt | 0.03 kg |
| Paketstorlek | 140 × 44 × 6 mm |
Frågor om den här produkten
How much power does the 1.20V DDR4-3200 module draw under sustained load?
The module operates at 1.20 volts, the standard DDR4 voltage, keeping power draw low during continuous server workloads.
What motherboard slot and firmware support are needed for this 288-pin registered ECC DIMM?
A DDR4 288-pin DIMM slot and a server-class platform that enables registered ECC memory are required.
Will the CL22 timing and Intel XMP 2.0 profile apply when mixed with slower DDR4 registered sticks?
The module runs at DDR4-3200 CL22 with an XMP 2.0 profile; the system will negotiate the highest common speed across all installed DIMMs.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



